Journeyman Exam #5 Questions And Answers 100% Verified

Journeyman Exam #5 Questions And Answers 100% Verified d. Prevent he connector from loosening under vibration - answerLocknuts are sometimes used in making electrical connections on studs. In this case the purpose of this locknuts is to ______ a. Be able to connect several wires to one stud b. Make it difficult to tamper with the connection c. Make a tighter connection d. Prevent he connector from loosening under vibration c. Use a hacksaw and ream - answerTo cut rigid conduit you should ________ a. Use a 3-wheel pipe cutter b. Use cold chisel and ream the ends c. Use a hacksaw and ream d. Order it cut to size b. A voltmeter - answerIn the course of normal operation the instrument that will be least effective in indicating that a generator may overheat because this is overloaded, is ________ a. A wattmeter b. A voltmeter c. An ammeter d. A stator thermocouple b. Two-gang switch - answerTwo switches in one box under one face-plate is called a ________ a. Double-pole switch b. Two-gang switch c. Two-way switch d. Mistake d. A 'LB' or 'T' similar fitting - answerA conduit body is _________ a. A cast fitting such as an FD or FS box b. A standard 10-foot length conduit c. A seal tight enclosure d. A 'LB' or 'T' similar fitting d. One or more rooms used as a housekeeping unit and having permanent cooking and sanitation provisions - answerA dwelling unit is ______ a. One unit of an apartment b. One or more rooms used by one or more persons c. One or more rooms with space for eating, living, and sleeping d. One or more rooms used as a housekeeping unit and having permanent cooking and sanitation provisions d. I, II, or III - answerEnclosed means, surrounded by a _______ which will prevent persons from accidentally contacting energized parts. I Wall II Fence III Housing or Case a. I only b. II only c. III only d. I, II, or III d. Copper - answerWhere the conductor material is not specified in the code, the conductors are assumed to be _____ a. Bus bars b. Aluminum c. Copper - clad aluminum d. Copper c. Voltage drop - answerThe voltage lost across a portion of a circuit is called the _______ a. Power lo