Vivint Practice Questions And Answers 100% Verified

Vivint Practice Questions And Answers 100% Verified True or False: The FireFighter may be installed next to a stand-alone battery-powered smoke detector. - answerFalse True or False: When performing a full system test, you may bypass any open doors or windows. - answerFalse When programming an SKEY1, you must Always...? - answerEnable emergency key True or False: When running power to the TAKE-345, polarity does not apply. - answerFalse When programming the emergency key for an SKEY1, which zone/sensor types are recommended to use? - answerAuxiliary and audible alarm True or False: When installing an SMKT3, you must use the included screws and anchors - answerTrue True or False: When installing the Fire Fighter, it is required to test the customer's existing smoke detectors. - answerT When installing a DW21, where is the approved location for the sensor? - answerBtw 6 & 2 in from the floor When installing a DW11 on a vinyl or metal frame, what should you primarily use to mount the sensor? - answerDouble sided tape Select all that apply: Which of the following materials can you use to group multiple ground terminals in a Takeover module? - answerWire caps or B connectors/Beans What sensor are you not allowed to program using a translator? - answerSmoke detector True or False: When installing the TAKE-345 you must always test the new 12v Battery before using it. - answerTrue