Seattle FEX-1 Starter Exam Questions and Answers 2024/2025 Solved 100%

Seattle FEX-1 Starter Exam Questions and Answers 2024/2025 Solved 100% What type of test is necessary on a Co2 hose before installation? - answerConductivity What is the maximum travel distance for a Class B fire extinguisher? (Light hazard, Ordinary Hazard, Extra Hazard) - answer50', 50', 50' Administrative Rating 9.01.04 states that ________ are to be followed. - answerNationally recognized standards A 10 Ft sq. heptane tank should have a ______ rated extinguisher protecting it. - answer20BC An aluminum shell extinguisher that was in a room that had a fire should be what? - answerDestroyed A Co2 should be hydrotested to what stamped operating pressure? - answer5/3 A cartridge less than 2 in. in diameter and 2 ft. in length __________? - answerDoes not require hydrotesting What is the identification mark for a class B fire extinguisher? - answerRed square What room temperature is used for a ratings test on fire extinguishers? - answer70 What does an inspection of a fire extinguisher consist of? - answerQuick check What is not looked at during a quick check? - answerAgent Maintenance shall be done how often? - answerYearly Maintenance does not include a thorough examination of which part of an extinguisher? - answerExtinguishing agent Any stainless steel subjected to ______________ should be __________ - answerCalcium Chloride, destroyed Labeling of test procedure started in _________________? - answerJanuary 1986 An extinguisher with a weight no exceeding 40 lbs. shall be mounted how high? - answerNo higher than 5 ft An extinguisher with a weight in excess of 40 lbs. shall be mounted how high? - answerNo higher than 3 1/2 inches What is not a disadvantage of dry chemical extinguishers? - answerLow ratin