CWB Codes and Standards Practice Test
Questions with Correct Answers
The AWS D1.1 Structural Welding Code-Steel - Answer-includes welding procedure
and performance qualification requirements
The CSA is one organization accredited by the Standards Council of Canada for
developing standards related to joining and inspection. Name another one. - Answer-
Canadian General Standards Board (CGSB)
Which Canadian standard includes ferrous and non-ferrous materials with notch
toughness and includes aluminum piping systems? - Answer-CSA Z662
True or false: "Provisions for pre-qualified procedures are included in CSA W59.2 and
AWS D1.2 standards/Codes for fabricating aluminum and its alloys". - Answer-False
CSA S473 - Answer-includes a comprehensive fracture control plan.
Most standards are created by: - Answer-voluntary efforts
In Canada, shop inspections of pressure vessels are performed by: - Answer-an
inspector employed by the regulatory authority in the province of fabrication.
What are the three main categories of qualified personnel required by CSA W47.1 and
CSA W47.2? - Answer-Welding Engineer, Welding Supervisor, Welder
Which of the following codes/standards do not deal with fabrication, but include the
qualification of welding procedures and welding personnel? - Answer-ASME Section IX
T/F - AWS D17.1 was developed in part to replace MIL-STD-1595 and MIL-STD-2219. -
Answer-True
The function of standards can be said to: - Answer-Educate, simplify, certify and protect
T/F - "Generally the word "shall" in a standard means that the user of the standard is
obliged to satisfy the condition". - Answer-True
CSA W59 allows for the use of what materials? - Answer-carbon steels and low-alloy
steels
Which code/standard does CSA B51 refer to for the qualification of welding procedures?
- Answer-ASME IX
Questions with Correct Answers
The AWS D1.1 Structural Welding Code-Steel - Answer-includes welding procedure
and performance qualification requirements
The CSA is one organization accredited by the Standards Council of Canada for
developing standards related to joining and inspection. Name another one. - Answer-
Canadian General Standards Board (CGSB)
Which Canadian standard includes ferrous and non-ferrous materials with notch
toughness and includes aluminum piping systems? - Answer-CSA Z662
True or false: "Provisions for pre-qualified procedures are included in CSA W59.2 and
AWS D1.2 standards/Codes for fabricating aluminum and its alloys". - Answer-False
CSA S473 - Answer-includes a comprehensive fracture control plan.
Most standards are created by: - Answer-voluntary efforts
In Canada, shop inspections of pressure vessels are performed by: - Answer-an
inspector employed by the regulatory authority in the province of fabrication.
What are the three main categories of qualified personnel required by CSA W47.1 and
CSA W47.2? - Answer-Welding Engineer, Welding Supervisor, Welder
Which of the following codes/standards do not deal with fabrication, but include the
qualification of welding procedures and welding personnel? - Answer-ASME Section IX
T/F - AWS D17.1 was developed in part to replace MIL-STD-1595 and MIL-STD-2219. -
Answer-True
The function of standards can be said to: - Answer-Educate, simplify, certify and protect
T/F - "Generally the word "shall" in a standard means that the user of the standard is
obliged to satisfy the condition". - Answer-True
CSA W59 allows for the use of what materials? - Answer-carbon steels and low-alloy
steels
Which code/standard does CSA B51 refer to for the qualification of welding procedures?
- Answer-ASME IX
