Virginia Hic Questions and Answers Already Passed

Virginia Hic Questions and Answers Already Passed The MINIMUN length drywall screw for installing 1/2 inch gypsum board to wood studs is 1 1/4 inches What is the MINIMUM breaking strength required of safety belt lanyards 5,400 pounds What is the MINIMUM clearance that combustible insulation MUST other heat-producing devices 1 inch What is the MAXIMUM flame spread index for insulation materials 25 The amount of water per sack of cement is what controls all EXCEPT Wear resistance The escape device for a trench over 4 feet deep MUST be within a MAXIMUM of 25 feet of the worker What is the correct sequence for installing a bi-fold door Top track, lower track, insert bottom pivot, insert upper pivot What is the MINIMUM height for a stairway handrail 34 inches How MUST rafters be framed to each other With rectangular ties The nailing holes in aluminum and vinyl siding are elongated to allow for Expansion and contraction What are batter boards stakes and ledger boards marking building lines The first step that needs to be taken prior to starting any excavation work is contracting the local utility companies What is the MAXIMUM distance horizontal reinforcement can be placed from the top of a masonry partition wall 16 inches What is the MINIMUM vertical reinforcement spacing for a reinforced concrete foundation wall that is 7 feet high and 10 inches thick on type SP soil 48 inches on center A third stairway stringer should be used when the stair width exceeds 30 inches Unless otherwise specified, the standard guideline for spacing contraction joints is to space them in feet 2 times the stab depth in inches What is the MINIMUM lap of riveted horizontal lap siding 1 inches For multiple-width masonry (mampostería de ancho múltiple) what is the MINIMUM thickness of grout between masonry units and reinforcements? 1/4 inch What is the MAXIMUM dimension of the ventilation coverings for under-floor space 1/4 inch The MOST specific information about the size and location of windows would be found in a Floor plan What is the MINIMUM illumination for general constructions area lighting 5 foot candles in drywall 3 trim is used to provide a finish edge What is the MINIMUM number of anchor bolts REQUIRED