S95 Exam Questions With 100% Correct Answers Updated & Verified Latest 2024

S95 Exam Questions With 100% Correct Answers Updated & Verified Latest 2024. Which duties can an S-95 Certificate of Fitness holder perform? - Correct Answer-Visual Inspections Only - of fire alarm system components and smoke detectors What is the primary purpose of Fire Alarm Systems? - Correct Answer-To warn building occupants and transmit signals indicating a fire condition to the Fire Department via central station. What is a Fire Alarm signal? - Correct Answer-The signal initiated by a fire alarm initiating device such as a manual fire alarm pull station, smoke detector, water-flow switch, or any device in which their activation indicates presence of fire. What is a Supervisory Signal? - Correct Answer-A signal indicating that a system or device being monitored has been compromised or is in an abnormal state. Is the FDNY dispatched for Supervisory Signals? - Correct Answer-No. The Facility Manager should investigate and correct the supervisory condition indicated by the FACP. What is a Trouble Signal? - Correct Answer-A signal that indicates a fault with the fire equipment. It must have an audible signal, distinctive from alarm signals What is the maximum number of minutes that routine handling should take?-- from receipt of trouble signal by central station until initiation of the investigation by telephone. - Correct Answer-FOUR minutes Is the FDNY dispatched for Trouble Signals? - Correct Answer-No. Trouble Signals aren't indicative of a fire condition. What is an Acknowledge Switch (ACK) ? - Correct Answer-This switch/button is used to acknowledge alarm, supervisory, or trouble conditions. Why is an Alarm Silence Switch helpful after an evacuation - while the source of alarm is being investigated? - Correct Answer-This switch/button silences audible and visual devices (sirens, bells, gongs) so it's easier for Emergency Responders to communicate. Which switch/button is pushed once an alarm condition is cleared? - Correct AnswerThe System Reset Switch S95 Personal Exam Questions & Answers | 75 Questions With 100% Correct Answers Updated & Verified Latest 2024 Smoke Detectors should be cleaned not less than - Correct Answer-Once every six months How often should Analog Smoke Detectors be cleaned? - Correct Answer-One week from receipt of an indication that cleaning is needed. How often should Smoke Detectors be tested for smoke entry? - Correct Answer-Not less than once a year After activation, which type of heat detector self-restores? Which type doesn't? - Correct Answer-Fixed-Temperature heat detectors: Doesn't self -restore and requires replacement. Rate of Rise heat detectors: self-restore Fire Alarm Circuits' primary power source shouldn't generate electric power exceeding which voltage? - Correct Answer-277/480 volts All abnormal conditions be investigated and noted where? - Correct Answer-A bound Log Book Alarm Notification Appliance - Correct Answer-A fire alarm system component (bell, light, etc.) that issues an audible, tactile, or visual alert. Annunciator - Correct Answer-A unit containing one or more indicator lamps, alphanumeric displays, etc. in which each indication provides status info about a circuit, condition, or location. ARCS (Auxiliary Radio Communication System) - Correct Answer-A wireless two-way building communication system for Fire Dept. use only. Accessibility - Correct Answer-Admitting close approach- not guarded by locked doors, elevation, etc. Initiating Device - Correct Answer-A system component that originates transmission of a change-of-state condition, such as in a smoke detector, manual fire alarm box, or supervisory switch. Nuisance Alarm - Correct Answer-An alarm caused by mechanical failure, malfunction, improper installation, improper maintenance or an undetermined cause. Plenum - Correct Answer-The open space that carries air between the ceilings and floor above.