CSA Standard W47.1-09 - CWB Welding Supervisor study guide WXE1.1 Latest 2024 Graded A

CSA Standard W47.1-09 - CWB Welding Supervisor study guide WXE1.1 Latest 2024 Graded A Does the CSA Standard W47.1 specify the requirements for a company seeking certification? Yes, This standard provides the requirements for the certification of companies engaged in the fusion welding of steel and the qualification of their personnel and welding procedures (Cl 1.1) Who is responsible for the welded products a company produces? The company (1.2) The requirements of this standard are based on the principle that a certified company has full responsibility for the quality of the welded product it produces and this responsibility cannot be transferred to its employed or retained personnel or to the administrator of this standard. Does this standard approve the products and services of a certified company? (Cl. 1.3) This standard governs the certification of companies. Certification pertains to the capability of the company with respect to welding. Certification should not be construed as approving any products or services of the certified company. What requirements are stipulated in CSA Standard W47.1 (Cl. 1.4) This standard stipulates requirements for: - welding engineers - welding supervisors - tack welders, welders and welding operators - documentation What standard or code reference publications are referred to in CSA Standard W47.1? (Cl. 2.1, 2.2) This standard refers to the following publications, and where such reference is made, it shall be to the edition listed below, including all amendments published there to: CSA (Canadian Standards Association) CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for concrete reinforcement G40.20/G40.21-04(R2009) - General requirements for rolled or welded structural quality steel/ Structural quality steel W48-06 - Filler metals and allied materials for metal arc welding W59-03(R2008) - Welded steel construction (metal arc welding) CAN/CSA-W117.2-06 - Safety in welding, cutting, and allied processes W178.1-08 - Certification of welding inspection organizations ASTM International (American Society for Testing and Materials) A 370-08a - Standard Test Methods and Definitions for Mechanical Testing of Steel Products E 10-07a - Standard Test Method for Brinell Hardness of Metallic Materials. E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of Metallic Materials AWS (American Welding Society) A3.0-01 Standard Definitions; Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal Spraying A5.12/A5.12M-98 (R2007) - Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting A.518/A518M-05 - Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding A5.23/A5.23M-07 - Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding A5.28/A5.28M-05 - Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding D1.1/D1.1M - Structural Welding Code - Steel D1.3/D1.3M - Structural Welding Code - Sheet Steel D1.6/D1.6M - Structural Welding Code - Stainless Steel SCC (Standards Council of Canada) Can-P-4E - General requirements for the Competence of Testing and Calibration Laboratories. What is the difference between "class" and "classification"? (Cl.3) Class - a category of welder qualification, e.g., the flat (F), horizontal (H), vertical (V), or overhead (O) welding positions. Classification - refers to the various types of welding personnel e.g., T, S, FW, ASW or WT What