CMT 1150 QUIZLET 1 WITH VERIFIED SOLUTIONS.

The design process starts with the _______ owner The _______ helps the owner determine how much space is needed architect Brainpower Read More Previous Play Next Rewind 10 seconds Move forward 10 seconds Unmute 0:03 / 0:15 Full screen The _______ (I.C.C.) publishes several model codes International Code Council A.H.J. stands for... Authority Having Jurisdiction The construction industry employs ____ percent of working people in the US and Canada 15% State building codes allow local governments to adopt a local building code, but they require that the local code... be at least as stringent as the state code. Four main classifications of construction residential, commercial, industrial, and civil The general contractor hires _______ to complete certain parts of a project subcontractors A model code has _______ no authority on its own The _______ serves as the architects agent throughout the design and construction process owner In _______ drawings, the most irregular surface is drawn in proportion as though it were flat against the drawing surface oblique _______ are drawings that show height elevations A _______ view shows the layout of an object viewed from above plan In an orthographic projection, each view shows _______ side(s) of the object one In an isometric drawing, horizontal lines are drawn at an angle of _______ degrees from horizontal 30 A set of drawings for a building usually includes plan views of the site (lot), the floor layout, and the _______ foundation To show all information accurately and to keep all lines and angles in proportion, most construction drawings are drawn by _______ projection orthographic A floor plan is a type of _______ view section In construction drawings, the views are called _______ plans and elevations Other isometric shapes can be sketched by _______ or _______ from a basic isometric shape adding or subtracting Floor plans of a house are frequently drawn 1/____ of the actual size 48 Each line represents ____ inch(es) at the 1/8th scale 2 On the 1" 1/2-inch scale, the divided unit is broken into twelfths of a foot (_______) inches Each line on the 1" 1/2 scale is equal to _____ of an inch 1/4" The engineers scale uses _______ feet and decimal parts of a foot At a scale of 1/4" = 1'-0", _______ inch on the drawing represents 1 foot on the actual building 1/4 The scale to which a drawing is made is _______ indicated alongside or beneath the title of the view The triangular architect's scale includes _______ scales frequently used on drawings eleven On an architect's scale the full-size scale is divided into ________ sixteenths The fraction, or number, near the zero at each end of the scale indicates the unit length in inches that is used on the drawing to represent _______ of the actual building 1 foot _______ lines are used to show the shape of an object object On construction drawings, dimensions are expressed in _______ feet and inches Dimensions that can be added together to come up with one overall dimension are called _______ dimensions chain Centerlines are made up of _______ long and short dashes _______ are used to show the centers of round or cylindrical objects centerlines The _______ of an arc is the distance from the center to the edge of the arc radius When a dimension is placed away from the appropriate detail, a thin line called a(n) _______ shows where the dimension belongs leader To show where an imaginary cut was made, a _______ line is drawn on the view through which the cut was made cutting-plane