Fire Inspector 2 Questions and Answers Rated A

Fire Inspector 2 Questions and Answers Rated A A code is: A legal requirement of a building feature or operating feature at a certain location A standard is: A set of specifications or requirements that is considered industry best practice and meets a minimum level of performance guidelines The most important tool the fire inspector possesses is: Knowledge Any non-compliance (code violation) that has been noticed during the fire inspection: Must be documented in the written report of the inspection One of the things that a Fire Inspector II could be expected to do that a Fire Inspector I would not, is to: Process a permit application A permit to use a chemical during a manufacturing process is an example of a(n): Hazardous materials use permit Which of the following individuals may have full police powers to investigate and arrest suspected arsonist and people causing false alarms? Fire investigator To ensure that an installation or construction is safe to be occupied, a fire inspector uses: Both prescriptive code and performance-based code The International Code Council is an example of a(n): Model code organization The principles that a fire inspector should follow during an inspection are dictated by: Ethics In the process of adopting a new or modified code or standard, the correct sequence of steps would be: Identification of need, Review by elected officials, public hearing, adoption of code into statute Which of the following positions describes a fire inspector who works within a fire department and who may respond to the fire scenes for investigative purposes? Fire Marshal Type II building is: Same as Type I but with less fire resistance Dry wall is considered: Limited-Combustible Masonry exterior bearing walls are usually found in: Type III and IV construction What can be said about steel members? They can melt in a severe fire Part of the building's weight and the building's content are supported by a: Load-bearing wall The most fire-resistive category of building construction is: Type I Annealed glass is known as: Single-pane glass The most common building material is: Wood Pyrolysis refers to: Decomposition without combustion The most common type of construction used today is: Type V Which of the following statements is true about gypsum board? It is a good insulator and noncombustible Trusses are