Category 3 Non-Cab Operated Crane Safety 2023/2024 verified to pass

Category 3 Non-Cab Operated Crane SafetyA floating crane with a capacity of 200,000lbs. is a ________________ crane. - correct answer Category 1 What is the category of a jib crane with a capacity of less than 20,000 pounds? - correct answer Category 3 An OET, Bridge crane with a capacity of 80,000lbs. is a ________________ crane. - correct answer Category 2 A commercial truck mounted crane with a capacity of 14,000 lbs. is a __________ crane. - correct answer category 4 What types of power does a Category 1 or 4 crane generally use and what is its source? - correct answer Electric or hydraulic power supplied by a diesel engine Load - ________ parts are those that restrain position or control the movement of the load. - correct answer controling A hook is what type of component? - correct answer Load-Bearing Part Hydraulic foot brakes are what type or group of components? - correct answer Load-Controlling Parts Load - _____________ parts are those that support the load. - correct answer bearing How is electrical current conveyed from the revolving portion of the crane to the lower crane structure? - correct answer Through the collector ring system Safety devices that provide protection for personnel and equipment are considered _____________ safety devices. - correct answer general Safety devices that affect the safe load lifting and handling capabilities of equipment are considered __________________ safety devices. - correct answer operational Which of the following does not affect the safe operation of the crane? - correct answer General Safety Devices A travel alarm is what type or group of components? - correct answer A travel alarm is what type or group of components? - correct answer General Safety Device During the walk around check you notice a loose bolt on the crane. You should: - correct answer Notify your supervisor of the deficiency. The crane Pre-use Check consists of: - correct answer A walk around visual check Performing a "No load" operational It is the operator's responsibility to report a deficiency to the Crane Department. - correct answer false Deficiencies are required to be reported by the end of the shift. - correct answer false If the upper limit switch is working correctly, there is no need to check the lower limit switch. - correct answer fasle Part of the no load operational check is to ensure the proper _________ of all controls. - correct answer function What is the most important reason to do a pre-use check? - correct answer To make sure the crane is safe to use.