NCCER Module 26206-17 Conductor Installation 2023/2024 verified to pass

NCCER Module 26206-17 Conductor Installationcable cutters The ends of 1,000 kcmil conductors can be trimmed using 1000 lbs In general, the pull exerted on cables pulled through cable trays using a basket grip not attached to the conductor should not exceed weight per foot x length x coefficient of friction what is the formula for pulling tension? performing a test pull The preferred method for checking for damaged conduit before pulling cable is 80% Mandrels should be approximately what percentage of the conduit size? 40 feet/min When pulling cable with a capstan, what is the maximum pulling speed that should utilized? Braking systems Due to the risk of runaways, what should be used on all long vertical cable pulls? nylon Which of the following is one of the most common types of wire-pulling rope on the market? The number of wraps on the puller drum (capstan) Which of the following determines the amount of force applied to a pull? fiberglass The three types of fish tape are steel, nylon, and along its natural curvature The feed-in setup should unreel the cable 500 pounds/foot of bend In general, the sidewall load on any raceway run should not exceed all communications equipment is in working order Before starting a cable pull, make sure that wrapped around the capstan