Fire Inspector 1 Chapter 5 Performing an Inspection Questions with Correct Solutions

Standard for the installation of sprinkler systems - NFPA 13 life safety code - NFPA 101 Standard on types of building construction - NFPA 220 Standard on subterranean space - NFPA 520 Guide on methods for evaluating potential for too! Flash over - NFPA 555 Standard for professional qualifications for fore inspector and plan examiner - NFPA 1031 type of inspection where you inspect the building because its turn has come up in the inspection cycle - Annual inspection Type of inspection that occurs when code violations have been noted and you return to see of the owner is now compliant with the code - Reinspection Type of inspection occurs when someone registers a concern of a code violation - Complaint inspection Types of inspections ensure compliance with fire code during and at the end of a building construction - Construction or final inspection Type of inspection occurs when the building department is notified of a new business requesting permission to open - Business license or change of occupancy inspection Type of inspection not performed by the inspector, but by the business owner - Self inspection Allows business owner to open with minor, non hazardous violations, but requires that those violations be addressed - Conditional approval Types of construction for a building that has structural members that are non combustible - Type 1 and type 2 Type of construction that allows exterior members to be non combustible and interior members can contain combustible materials where allowed by code - Type 3 Type 4 construction (heavy timber) has lumber dimensional sizes exceeding - 4" Describes how the space in an occupancy is being used - Occupancy classification The legal adoption of a specific set of codes by local jurisdiction - Enabling legislation Four types of forms used during inspection - Inspection ,final construction,complaint, stop work orders