Texas CDL - Air Brake Test

Oil and water usually collect in compressed air tanks. If you do not have an automatic tank drain, when should you drain the air tanks? After working every day. Why drain water from the compressed air tanks? Water can freeze in cold weather and cause brake failure. The air brake system for a straight truck or bus should not leak at a rate of more than __________ psi per minute with the engine off and the brakes released. 2 To make an emergency stop with air brakes, using the stab braking method, you should: Press on the brake pedal as hard as you can, release the brakes when the wheels locked, put on the brakes again when the wheels start rolling. You should know when your brakes are fading when: You have to press the brake pedal harder to control speed on a downgrade. If the air compressor should develop a leak, what keeps the air in the tanks? The one way check valve. To check the brake slack on S-cam brakes you should park on: Park on level ground, chock the wheels, and release the parking brakes. The application pressure gauge shows how much pressure you have: When you are applying to the brakes. The spring brakes used on the chambers in a straight truck will bring you to a stop when air pressure drops below _________ psi. 20 The safety valve is set to automatically reduce pressure at _________ psi. 150 Your truck has a dual air system and one of the system loses its pressure. What will happen? Either the front or back brake will not be fully operational. If your truck or bus has dual parking control valves, you can use pressure from a separate tank to: Release the spring emergency/parking brakes to move a short distan