Plumbing Journeyman Exam| 100 Questions | With Complete Solutions

A 4-inch by 3-inch closet bend shall be acceptable. T/F correct answer: True (IPC 425.4) What is the minimum number of toilets in an educational facility men's room if the facility enrolls 500 people? correct answer: 10 (IPC 403.1) "Drinking fountains shall be located on a/an ____________ route." correct answer: accessable What is the minimum waste connection for an automatic clothes washer? correct answer: 2" (IPC 406.2) Water closet compartments shall be not less than _____ inches in width and _____ inches in depth for wall-hung water closets. correct answer: 30", 56" (IPC 405.3.1) Plumbing fixtures shall be constructed of _______________ materials. correct answer: approved (IPC 402.1) The walls or partitions shall begin at a height not greater than _____ inches from and extend not less than _____ inches above the finished floor surface. correct answer: 12", 60" (IPC 405.3.5) The hot water supplied to bathtubs and whirlpool bathtubs shall be limited to not greater than 110°F. T/F correct answer: False, 120 degrees (IPC 412.5) Water closet compartments shall be not less than _____ inches in width and not less than _____ inches in depth for floor-mounted water closets. correct answer: 30", 60" (IPC 405.3.1) Removable shower strainers openings shall not be less than _______ inches in least dimension. correct answer: 1/4" (IPC 421.3) What is the minimum waste connection for a lavatory? correct answer: 1 1/4" (IPC 419.3) What is the minimum waste connection for a floor drain? correct answer: 2' (IPC 413.3) The (toilet) flange shall be attached to the drain and anchored to the structure. T/F correct answer: True (IPC 405.4) The horizontal dimension between walls or partitions at each