Intro to Millwright Questions and
Answers 100% Correct.
A millwright is a tradesperson who build, installs, and maintains machinery. - ANSWER-
True
____________________ is the process of reducing and shaping materials using power
tools. - ANSWER-Machining
Pharmaceuticals and aerospace are examples of two industries in which UBC
millwrights work. - ANSWER-True
Employability skills are best defined as the technical and physical skills and abilities that
are critical for installing and maintaining machinery. - ANSWER-False
Which of the following are types of employability skills? - ANSWER-Ability to work with
others and to understand and use information
Which of the following is the responsibility of a job site steward? - ANSWER-Handling
disputes within the crew and between members of other trades
If the apprentice has a question about a task, who should he or she ask for clarification?
- ANSWER-Journeyman
Emergency contact information is required on every job site. - ANSWER-True
PPE is clothing and gear intended to reduce exposure to hazards in the workplace,
such as hard hats, ___________, ____________, and face shields. - ANSWER-
goggles, respirators
SDSs are documents that list the properties of chemicals and their safe handling
requirements. - ANSWER-True
A ________ is anything that causes a danger or risk. - ANSWER-Hazard
A physical hazard is a dangle for risk that can cause injury or death through contact. -
ANSWER-True
________ ________ ________ is clothing and equipment, such as hardhats, goggles,
respirators, and face shields, intended to reduce exposure to hazards in the workplace.
- ANSWER-Personal Protective Equipment
,How a substance enters the body is known as the route __________ - ANSWER-of
exposure
The ________ ________ ________ is a document that provides crew members and
emergency personnel information on substances found in the workplace. - ANSWER-
Safety Data Sheet
Which of the following hazards is any organism or by-product of an organism that poses
a threat to living beings? - ANSWER-Biological
To avoid infection and allergic reactions that could possibly be fatal, one of the best
practices is to avoid entering any are without understanding the hazards that might be
present. - ANSWER-True
When welding, a crew members is commonly exposed to _________ radiation. -
ANSWER-Beta
Frustration is the feeling of security while being unaware of potential danger. -
ANSWER-False
In many cases, even before hired, the millwright must pass a site-specific safety test. -
ANSWER-True
________ meetings are daily meetings that take place before any work is conducted. -
ANSWER-Toolbox
A ________ ________ arrest system is a type of PPE that eliminates impact during fall.
- ANSWER-Personal Fall
Stepladders should be opened fully and placed on a stable, level surface to prevent
tipping. - ANSWER-True
For maximum stability, the crew member must always maintain ________ ________
contact while using ladder. - ANSWER-Three Point
Which of the following typically includes a set of vertical supports, horizontal rails, and
wood or metal platforms? - ANSWER-Scaffold
A confined space is any space that is designed for continuous occupancy. - ANSWER-
False
Which of the following items are included in a personal fall arrest system (PFAS)? -
ANSWER-Anchorages, connectors and a full body harness
, Only those who are trained and authorized are allowed to enter a confined space. -
ANSWER-True
In most cases when lifting objects, the freestyle method of lifting should be used. -
ANSWER-False
The best way to avoid dehydration is to drink small amounts of water throughout the
day. - ANSWER-True
The numbers 0, 1, 2, and 3 are examples of what? - ANSWER-Whole numbers
In division the problem = 32, the number 3 is called what? - ANSWER-Divisor
Reducing a fraction requires multiplying. - ANSWER-False
When adding and subtracting fractions, the denominator must be the same for all
fractions. - ANSWER-True
Using ________ and reading a ________ chart are two ways to convert between
fractions and decimals. - ANSWER-Math, Conversion
________ is the measurement of a surface contained within a two-dimensional
boundary. - ANSWER-Area
Calculating area requires multiplying length, width, and height. - ANSWER-False
The ________ ________ is used to find the missing length of one side of a right angle. -
ANSWER-3, 4, 5
The 57 5/16" method is used to draw an arc that includes 1" increments. - ANSWER-
True
When machine's power source has been disconnected, it is considered which of the
following? - ANSWER-De-engergized
The process of rendering machinery inoperative is called _______/________ -
ANSWER-Lockout/ Tagout
Even is a machine's primary energy has been disconnected, the machine may still
contain ________ energy. - ANSWER-Stored
Which of the following is not a form of stored hazardous energy? - ANSWER-Biological
Lockout/tagout programs will vary between each facility. - ANSWER-true
Answers 100% Correct.
A millwright is a tradesperson who build, installs, and maintains machinery. - ANSWER-
True
____________________ is the process of reducing and shaping materials using power
tools. - ANSWER-Machining
Pharmaceuticals and aerospace are examples of two industries in which UBC
millwrights work. - ANSWER-True
Employability skills are best defined as the technical and physical skills and abilities that
are critical for installing and maintaining machinery. - ANSWER-False
Which of the following are types of employability skills? - ANSWER-Ability to work with
others and to understand and use information
Which of the following is the responsibility of a job site steward? - ANSWER-Handling
disputes within the crew and between members of other trades
If the apprentice has a question about a task, who should he or she ask for clarification?
- ANSWER-Journeyman
Emergency contact information is required on every job site. - ANSWER-True
PPE is clothing and gear intended to reduce exposure to hazards in the workplace,
such as hard hats, ___________, ____________, and face shields. - ANSWER-
goggles, respirators
SDSs are documents that list the properties of chemicals and their safe handling
requirements. - ANSWER-True
A ________ is anything that causes a danger or risk. - ANSWER-Hazard
A physical hazard is a dangle for risk that can cause injury or death through contact. -
ANSWER-True
________ ________ ________ is clothing and equipment, such as hardhats, goggles,
respirators, and face shields, intended to reduce exposure to hazards in the workplace.
- ANSWER-Personal Protective Equipment
,How a substance enters the body is known as the route __________ - ANSWER-of
exposure
The ________ ________ ________ is a document that provides crew members and
emergency personnel information on substances found in the workplace. - ANSWER-
Safety Data Sheet
Which of the following hazards is any organism or by-product of an organism that poses
a threat to living beings? - ANSWER-Biological
To avoid infection and allergic reactions that could possibly be fatal, one of the best
practices is to avoid entering any are without understanding the hazards that might be
present. - ANSWER-True
When welding, a crew members is commonly exposed to _________ radiation. -
ANSWER-Beta
Frustration is the feeling of security while being unaware of potential danger. -
ANSWER-False
In many cases, even before hired, the millwright must pass a site-specific safety test. -
ANSWER-True
________ meetings are daily meetings that take place before any work is conducted. -
ANSWER-Toolbox
A ________ ________ arrest system is a type of PPE that eliminates impact during fall.
- ANSWER-Personal Fall
Stepladders should be opened fully and placed on a stable, level surface to prevent
tipping. - ANSWER-True
For maximum stability, the crew member must always maintain ________ ________
contact while using ladder. - ANSWER-Three Point
Which of the following typically includes a set of vertical supports, horizontal rails, and
wood or metal platforms? - ANSWER-Scaffold
A confined space is any space that is designed for continuous occupancy. - ANSWER-
False
Which of the following items are included in a personal fall arrest system (PFAS)? -
ANSWER-Anchorages, connectors and a full body harness
, Only those who are trained and authorized are allowed to enter a confined space. -
ANSWER-True
In most cases when lifting objects, the freestyle method of lifting should be used. -
ANSWER-False
The best way to avoid dehydration is to drink small amounts of water throughout the
day. - ANSWER-True
The numbers 0, 1, 2, and 3 are examples of what? - ANSWER-Whole numbers
In division the problem = 32, the number 3 is called what? - ANSWER-Divisor
Reducing a fraction requires multiplying. - ANSWER-False
When adding and subtracting fractions, the denominator must be the same for all
fractions. - ANSWER-True
Using ________ and reading a ________ chart are two ways to convert between
fractions and decimals. - ANSWER-Math, Conversion
________ is the measurement of a surface contained within a two-dimensional
boundary. - ANSWER-Area
Calculating area requires multiplying length, width, and height. - ANSWER-False
The ________ ________ is used to find the missing length of one side of a right angle. -
ANSWER-3, 4, 5
The 57 5/16" method is used to draw an arc that includes 1" increments. - ANSWER-
True
When machine's power source has been disconnected, it is considered which of the
following? - ANSWER-De-engergized
The process of rendering machinery inoperative is called _______/________ -
ANSWER-Lockout/ Tagout
Even is a machine's primary energy has been disconnected, the machine may still
contain ________ energy. - ANSWER-Stored
Which of the following is not a form of stored hazardous energy? - ANSWER-Biological
Lockout/tagout programs will vary between each facility. - ANSWER-true
