NCCER Module 9 (Introduction to Materials Handling)
Quiz 2023
A ____ is defined as the quantity that can be transported at one time by a
machine or vehicle.
Load
Before attempting to lift any material, you should look for protruding ____, wires,
or sharp edges?
Nails
The proper lifting procedure is: lift with your ____, keep your ____ straight, and
keep your ____ up.
Legs, back, head
You can have trouble transporting a load that is ____ and ____.
Long, protruding
When working with cables and a pull system, it is acceptable to use a ____ ____
rope.
Low-stretch
Before using a ____ handling device, you must ____ it.
Materials, inspect
To ____ the center of gravity when moving materials, you should ____ place the
____ load on the ____.
Lower, always, heaviest, bottom
When ____ materials on an inclined or declined surface, you must be sure the
____ does not ____ the ____ capacity.
Carting, load, exceed, labeled
____ ____ may have a rotating table surface and/or spikes on the table surface for
a better ____.
Roller skids, grip
A ____ uses the force applied with a lever, screw, or hydraulic press to raise
heavy objects.
Jack
In order to work with ____ materials-handling equipment, you must be ____,
certified, and ____.
Motorized, trained, authorized
An ____ ____ is used for lifting and moving heavy loads on a smooth surface.
Industrial forklift.
The ____ of the fall zone on a forklift is ____ the height of the ____ being lifted.
Diameter, twice, load
When using ____ signals, you must keep ____ ____ with the operator.
Hand, eye-contact
An ____ carrying workers and ____ to an upper floor is considered a ____ in
relation to materials handling.
Elevator, tools, load
Quiz 2023
A ____ is defined as the quantity that can be transported at one time by a
machine or vehicle.
Load
Before attempting to lift any material, you should look for protruding ____, wires,
or sharp edges?
Nails
The proper lifting procedure is: lift with your ____, keep your ____ straight, and
keep your ____ up.
Legs, back, head
You can have trouble transporting a load that is ____ and ____.
Long, protruding
When working with cables and a pull system, it is acceptable to use a ____ ____
rope.
Low-stretch
Before using a ____ handling device, you must ____ it.
Materials, inspect
To ____ the center of gravity when moving materials, you should ____ place the
____ load on the ____.
Lower, always, heaviest, bottom
When ____ materials on an inclined or declined surface, you must be sure the
____ does not ____ the ____ capacity.
Carting, load, exceed, labeled
____ ____ may have a rotating table surface and/or spikes on the table surface for
a better ____.
Roller skids, grip
A ____ uses the force applied with a lever, screw, or hydraulic press to raise
heavy objects.
Jack
In order to work with ____ materials-handling equipment, you must be ____,
certified, and ____.
Motorized, trained, authorized
An ____ ____ is used for lifting and moving heavy loads on a smooth surface.
Industrial forklift.
The ____ of the fall zone on a forklift is ____ the height of the ____ being lifted.
Diameter, twice, load
When using ____ signals, you must keep ____ ____ with the operator.
Hand, eye-contact
An ____ carrying workers and ____ to an upper floor is considered a ____ in
relation to materials handling.
Elevator, tools, load
