CWB level 1 exam prep
The welding inspector's role in welding begins: correct answersbefore welding starts
Prior to welding, the welding inspector should check that the: correct answersapproved welding procedures are available and the welders are qualified
Which is not the function of the welding inspector? correct answersDeveloping a repair procedure
If during a manufacturing inspection, cracking is found on the outside of a pressure vessel weld, the inspector shall: correct answersrecord the details of the crack, immediately draw it to the attention of the welding supervisor or the welder and check that it is repaired in accordance with an authorized repair procedure
The Material Test Report (MTR) is a (an) correct answersimportant document that provides the owner (and the fabricator) with the ability to identify properly qualified materials.
The material test report (MRT) correct answersprovides mechanical test results that confirm that the product covered meets the specification.
Reports produced by the welding inspector should be; correct answersneat and accurate
When reviewing a fabricator's ITP on behalf of the client, the welding inspector should: correct answersindicate any hold points so that he may witness specific activities
Which information would be expected on the fabricator's ITP? correct answersThe point in the project at
which welding starts
Following completion of the welding operation, the welding inspector: correct answerschecks that all the
required welds have been made
The welding inspector's role in welding begins: correct answersbefore welding starts
Prior to welding, the welding inspector should check that the: correct answersapproved welding procedures are available and the welders are qualified
Which is not the function of the welding inspector? correct answersDeveloping a repair procedure
If during a manufacturing inspection, cracking is found on the outside of a pressure vessel weld, the inspector shall: correct answersrecord the details of the crack, immediately draw it to the attention of the welding supervisor or the welder and check that it is repaired in accordance with an authorized repair procedure
The Material Test Report (MTR) is a (an) correct answersimportant document that provides the owner (and the fabricator) with the ability to identify properly qualified materials.
The material test report (MRT) correct answersprovides mechanical test results that confirm that the product covered meets the specification.
Reports produced by the welding inspector should be; correct answersneat and accurate
When reviewing a fabricator's ITP on behalf of the client, the welding inspector should: correct answersindicate any hold points so that he may witness specific activities
Which information would be expected on the fabricator's ITP? correct answersThe point in the project at
which welding starts
Following completion of the welding operation, the welding inspector: correct answerschecks that all the
required welds have been made
