Avixa CTS | Questions and Answers with complete solution

what would be the volume of a room that measures 7 meters long by 6 meters wide and 3 meters high - 126 meters = 7*6*3 What would a mechanical drawing be used for? - location of heating , plumbing and ventilation in a venue How is the volume of a space calculated - Length times width times hight What is the most important in formation to be gathered on a site visit - room size and layout When conducting a site visit if a ladder is needed what type of ladder should be used and why? - fiberglass or wood in case a surface might be electrified A scale drawing unit of 1/1:20 signifies what type of scale-drawing measurement? - a common metric scale When considering customer constraints for ___, the signal type, distance from viewers, aspect ratio and source resolution are all limiting factors. - image display When documenting requirements for network services, a formal technical document called a(n) _______ is often utilized. - SLA( service level agreement) One major difference between the Service Level Agreement process and the traditional Program Report is the SLA focuses upon - Measurement of service through monitoring procedures "When gathering and documenting site information and requirements for the overall functional needs of an AV system, a document called the _____ is usually produced." - program report