MECHANICAL ARCHITECTURE OF IN-PIPE DEVICES
A SEMINAR REPORT
Submitted by
MUHAMMED SHAKEEL
(KSD19ME042)
To APJ Abdul Kalam Technological University
In partial fulfilment of the requirement for the award of the degree of
BACHELOR OF TECHNOLOGY
in
MECHANICAL ENGINEERING
Department of Mechanical Engineering
LBS College of Engineering
Kasaragod, Kerala 671542
December 2022
, CERTIFICATE
This is to certify that the seminar report titled “MECHANICAL ARCHITECTURE OF IN-
PIPE DEVICES” Submitted by MUHAMMED SHAKEEL, to the APJ Abdul Kalam
Technological University in partial fulfilment of the requirement for the award of degree of
Bachelor of Technology in Mechanical Engineering, is a bonafide record of the seminar
report carried out under our supervision and guidance.
Mr. Sajan Jerome Mr. Vinod O.M
Prof.Dr.Aboobacker Kadengal Assistant Professor HOD
Department of Mechanical Engg. Department of Mechanical Engg. Department of Mechanical Engg.
(Guide) (Coordinator)
Place: Kasaragod
Date: 13/10/2022
, ACKNOWLEDGEMENT
I take this opportunity to express my deep sense of gratitude and sincere thanks to all who
helped me to complete the work successfully, my first and foremost thanks goes to God
Almighty who showered his immense blessings on my effort.
I would like to express my sincere gratitude to Mr. Vinod O M (Head of the department), for his
support and co-operation.
I am deeply indebted to my guide, Dr Aboobacker Kadengal ( Professor, Department of
Mechanical Engineering) for his excellent guidance, constant encouragement, suggestions and
constructive feedback in the successful completion and presentation of our project.
I also thank Mr. Sajan Jerome (Assistant Professor, Department of Mechanical Engineering) for
extending his valuable support for the presentation of our project.
I wish to express my sincere gratitude towards the staff members of our Department and
Department Library.
Finally, I thank my parents, all my friends, near and dear ones who directly and indirectly
contributed to the successful completion of this work.
A SEMINAR REPORT
Submitted by
MUHAMMED SHAKEEL
(KSD19ME042)
To APJ Abdul Kalam Technological University
In partial fulfilment of the requirement for the award of the degree of
BACHELOR OF TECHNOLOGY
in
MECHANICAL ENGINEERING
Department of Mechanical Engineering
LBS College of Engineering
Kasaragod, Kerala 671542
December 2022
, CERTIFICATE
This is to certify that the seminar report titled “MECHANICAL ARCHITECTURE OF IN-
PIPE DEVICES” Submitted by MUHAMMED SHAKEEL, to the APJ Abdul Kalam
Technological University in partial fulfilment of the requirement for the award of degree of
Bachelor of Technology in Mechanical Engineering, is a bonafide record of the seminar
report carried out under our supervision and guidance.
Mr. Sajan Jerome Mr. Vinod O.M
Prof.Dr.Aboobacker Kadengal Assistant Professor HOD
Department of Mechanical Engg. Department of Mechanical Engg. Department of Mechanical Engg.
(Guide) (Coordinator)
Place: Kasaragod
Date: 13/10/2022
, ACKNOWLEDGEMENT
I take this opportunity to express my deep sense of gratitude and sincere thanks to all who
helped me to complete the work successfully, my first and foremost thanks goes to God
Almighty who showered his immense blessings on my effort.
I would like to express my sincere gratitude to Mr. Vinod O M (Head of the department), for his
support and co-operation.
I am deeply indebted to my guide, Dr Aboobacker Kadengal ( Professor, Department of
Mechanical Engineering) for his excellent guidance, constant encouragement, suggestions and
constructive feedback in the successful completion and presentation of our project.
I also thank Mr. Sajan Jerome (Assistant Professor, Department of Mechanical Engineering) for
extending his valuable support for the presentation of our project.
I wish to express my sincere gratitude towards the staff members of our Department and
Department Library.
Finally, I thank my parents, all my friends, near and dear ones who directly and indirectly
contributed to the successful completion of this work.
