October 2011; Revised March 2021
Model Certified Lead Dust Sampling
Technician Training Course
STUDENT MANUAL
EPA-740-R-09-005
, Student Overview
This Course Curriculum
The U.S. Environmental Protection Agency (US EPA) and Office of Housing and Urban
Development (HUD) have produced this course to teach individuals how to conduct non-
abatement lead dust clearance testing. This course is designed to be taught over an 8-hour time
period with 2 hours devoted to hands-on training. For certification purposes, the course can be
taught by either an EPA-accredited training provider, or a training provider accredited by an
authorized State, Tribe, or Territory.
Objectives for the Course
At the end of the course, students will be able to:
• Understand the Federal, State, and Indian Tribe regulatory requirements for lead dust
clearance testing;
• Conduct a visual inspection and correctly identify visible dust, debris, and deteriorated
paint;
• Appropriately determine where to take dust samples and how to develop a sampling
strategy.
• Collect dust samples in accordance with standard acceptable procedures;
• Interpret the results of a laboratory analysis for lead in dust correctly;
• Apply these skills to conduct an appropriate lead dust clearance test in post-renovation
and other circumstances;
• Write a complete, accurate, and understandable report of sampling results; and
• Explain the results to the client.
Audience for the Course
Organizations that will be interested in this course include:
• State and local public agencies that administer Federal funds for housing;
• Non-profit and community housing organizations, particularly those that assist public
agencies in administering Federal housing funds;
• State and local health departments;
• Home inspection firms; and
• Lead and other environmental services firms.
Appropriate staff to take this course will include:
• Housing quality standards (HQS) inspectors;
i
, Student Overview
• Rehabilitation specialists;
• Home inspectors; and
• Other staff who are involved in evaluating buildings.
Overview of Lead Dust Sampling Technician Training Curriculum
This training course consists of three parts in the six chapters including:
Part 1: Introduction
• Chapter 1: Introduction provides an overview of the course, the role of a lead dust
sampling technician, and the relevance of the EPA Renovation, Repair, and Painting
(RRP) Rule and HUD’s Lead Safe Housing Rule (LSHR) .
Part 2: Skills
• Chapter 2: Visual Inspection explains how to perform a visual inspection for paint
chips, dust and debris and, in some circumstances, deteriorated paint.
• Chapter 3: Lead Dust Wipe Sampling describes how to prepare for and collect dust
wipe samples.
• Chapter 4: Selecting a Laboratory and Interpreting Results describes how to select
an accredited lab, how to submit samples, and how to interpret the results and determine
if they are acceptable.
Part 3: Application
• Chapter 5: Writing the Report covers how to prepare the report and explain the results
to the client.
• Chapter 6: Putting the Skills Together gives the students an opportunity to put their
new skills to the test in a series of desktop and hands on exercises, that cover the issues of
sample location selection, dust wipe sampling, interpreting laboratory results and writing
a dust lead clearance report
Course Materials
Course materials include slides, an instructor manual, a student manual, and a Lead Dust
Sampling Technician Field Guide.
• Slides. Each chapter in this course has slides that highlight key points to be made during
the presentation. The slides also include pictures, diagrams, and other visual aids.
• Student Manual. The student manual includes everything in the instructor manual
except this instructor overview and the instructor notes that appear at the front of every
chapter in the instructor manual.
ii
, Student Overview
• Lead Dust Sampling Technician Field Guide. The Lead Dust Sampling Technician
Field Guide provides protocols for conducting post-renovation clearance under EPA’s
RRP Rule and clearance examinations under HUD’s LSHR in housing and child-
occupied facilities built before 1978. This guide also provides Federal standards for lead
in dust. Refer to the Lead Dust Sampling Technician Field Guide as appropriate.
iii
Model Certified Lead Dust Sampling
Technician Training Course
STUDENT MANUAL
EPA-740-R-09-005
, Student Overview
This Course Curriculum
The U.S. Environmental Protection Agency (US EPA) and Office of Housing and Urban
Development (HUD) have produced this course to teach individuals how to conduct non-
abatement lead dust clearance testing. This course is designed to be taught over an 8-hour time
period with 2 hours devoted to hands-on training. For certification purposes, the course can be
taught by either an EPA-accredited training provider, or a training provider accredited by an
authorized State, Tribe, or Territory.
Objectives for the Course
At the end of the course, students will be able to:
• Understand the Federal, State, and Indian Tribe regulatory requirements for lead dust
clearance testing;
• Conduct a visual inspection and correctly identify visible dust, debris, and deteriorated
paint;
• Appropriately determine where to take dust samples and how to develop a sampling
strategy.
• Collect dust samples in accordance with standard acceptable procedures;
• Interpret the results of a laboratory analysis for lead in dust correctly;
• Apply these skills to conduct an appropriate lead dust clearance test in post-renovation
and other circumstances;
• Write a complete, accurate, and understandable report of sampling results; and
• Explain the results to the client.
Audience for the Course
Organizations that will be interested in this course include:
• State and local public agencies that administer Federal funds for housing;
• Non-profit and community housing organizations, particularly those that assist public
agencies in administering Federal housing funds;
• State and local health departments;
• Home inspection firms; and
• Lead and other environmental services firms.
Appropriate staff to take this course will include:
• Housing quality standards (HQS) inspectors;
i
, Student Overview
• Rehabilitation specialists;
• Home inspectors; and
• Other staff who are involved in evaluating buildings.
Overview of Lead Dust Sampling Technician Training Curriculum
This training course consists of three parts in the six chapters including:
Part 1: Introduction
• Chapter 1: Introduction provides an overview of the course, the role of a lead dust
sampling technician, and the relevance of the EPA Renovation, Repair, and Painting
(RRP) Rule and HUD’s Lead Safe Housing Rule (LSHR) .
Part 2: Skills
• Chapter 2: Visual Inspection explains how to perform a visual inspection for paint
chips, dust and debris and, in some circumstances, deteriorated paint.
• Chapter 3: Lead Dust Wipe Sampling describes how to prepare for and collect dust
wipe samples.
• Chapter 4: Selecting a Laboratory and Interpreting Results describes how to select
an accredited lab, how to submit samples, and how to interpret the results and determine
if they are acceptable.
Part 3: Application
• Chapter 5: Writing the Report covers how to prepare the report and explain the results
to the client.
• Chapter 6: Putting the Skills Together gives the students an opportunity to put their
new skills to the test in a series of desktop and hands on exercises, that cover the issues of
sample location selection, dust wipe sampling, interpreting laboratory results and writing
a dust lead clearance report
Course Materials
Course materials include slides, an instructor manual, a student manual, and a Lead Dust
Sampling Technician Field Guide.
• Slides. Each chapter in this course has slides that highlight key points to be made during
the presentation. The slides also include pictures, diagrams, and other visual aids.
• Student Manual. The student manual includes everything in the instructor manual
except this instructor overview and the instructor notes that appear at the front of every
chapter in the instructor manual.
ii
, Student Overview
• Lead Dust Sampling Technician Field Guide. The Lead Dust Sampling Technician
Field Guide provides protocols for conducting post-renovation clearance under EPA’s
RRP Rule and clearance examinations under HUD’s LSHR in housing and child-
occupied facilities built before 1978. This guide also provides Federal standards for lead
in dust. Refer to the Lead Dust Sampling Technician Field Guide as appropriate.
iii
