MSF Motorcycle Safety Foundation eCourse Questions And Answers 2023
FINE-C Refers to - Correct Answer-an engine pre-start routine.
FINE-C stands for, - Correct Answer-Fuel, Ignition, Neutral, Engine cut-off switch, Choke and Clutch.
The F in FINE-C means to.. - Correct Answer-Fuel, if equipped, means to turn the fuel supply valve on.
The I in FINE-C is for - Correct Answer-Ignition, means turn the ignition switch to the On
position. Some indicator lights should come on.
The N in FINE-C is for - Correct Answer-Neutral, means to be in Neutral. The green light in the instrument cluster "indicates" neutral. When in neutral, the motorcycle will roll
forward and backward with the clutch lever and front brake lever released.
The E in FINE-C is for - Correct Answer-Engine cut-off switch means put the switch in the Run/On position.
The C in FINE-C is for - Correct Answer-Choke and Clutch, means to set the choke and
squeeze in the clutch lever. The choke should be On for a cold engine, although some motorcycles do not have a choke.
Always apply at least one _________ when starting the engine. - Correct Answer-
Brake.
Do not use the ________ if the _________ is On as this could provide too much fuel to the engine. - Correct Answer-throttle, choke
Once the engine is started, you can release the _________ lever, but do so slowly in case the motorcycle is not in _________. - Correct Answer-clutch, neutral
Do not take your hand off the ________ when starting the engine of a motorcycle because the motorcycle may be in gear. - Correct Answer-clutch,
The throttle is located on - Correct Answer-The right hand grip.
To roll on the throttle means to, - Correct Answer-twist the throttle Towards You.
The clutch level is located on - Correct Answer-The left hand grip. When you squeeze in the clutch, - Correct Answer-there is no power going to the rear wheel.
The gearshift is located on - Correct Answer-the left footrest.
To use the gearshift, - Correct Answer-Lift your foot up for a higher gear, and press down for a lower gear.
Whens shifting gears, your foot only needs to move up or down _________ - Correct Answer-an inch or so.
Most motorcycles have how many gears? - Correct Answer-5 or 6
Neutral gear is located in between which gears? - Correct Answer-First and second gear.
The fuel supply valve is located - Correct Answer-under the Engine.
What does the fuel supply valve do? - Correct Answer-The fuel supply valve controls the amount of fuel to the engine tank
The Ignition Switch is often located near the - Correct Answer-instrument cluster.
Positions on the ignition switch include - Correct Answer-On, Off and Lock, and some include a Park position.
The Lock and Park positions on an ignition switch... - Correct Answer-engage the steering lock and allow the key to be removed.
The Park position on the ignition switch.. - Correct Answer-turns on the taillight for better
visibility when parked for a short time on the side of the road.
The Choke Control is located - Correct Answer-on the handlebars or near the engine.
What does the choke control do? - Correct Answer-It provides an enriched fuel mixture to help start a cold engine. It also raises the idle to permit the engine to warm quickly. It should be turned Off as soon as the engine idles smoothly without it.
Fuel Injected motorcycles do or not have a choke control? - Correct Answer-They do not.
Where is the engine cut-off switch? - Correct Answer-The Engine Cut-Off Switch can be
found near the right handgrip and is operated with the thumb.
What does the engine cut-off switch do? - Correct Answer-It allows you to shut off the engine without removing your hand from the handgrip.
FINE-C Refers to - Correct Answer-an engine pre-start routine.
FINE-C stands for, - Correct Answer-Fuel, Ignition, Neutral, Engine cut-off switch, Choke and Clutch.
The F in FINE-C means to.. - Correct Answer-Fuel, if equipped, means to turn the fuel supply valve on.
The I in FINE-C is for - Correct Answer-Ignition, means turn the ignition switch to the On
position. Some indicator lights should come on.
The N in FINE-C is for - Correct Answer-Neutral, means to be in Neutral. The green light in the instrument cluster "indicates" neutral. When in neutral, the motorcycle will roll
forward and backward with the clutch lever and front brake lever released.
The E in FINE-C is for - Correct Answer-Engine cut-off switch means put the switch in the Run/On position.
The C in FINE-C is for - Correct Answer-Choke and Clutch, means to set the choke and
squeeze in the clutch lever. The choke should be On for a cold engine, although some motorcycles do not have a choke.
Always apply at least one _________ when starting the engine. - Correct Answer-
Brake.
Do not use the ________ if the _________ is On as this could provide too much fuel to the engine. - Correct Answer-throttle, choke
Once the engine is started, you can release the _________ lever, but do so slowly in case the motorcycle is not in _________. - Correct Answer-clutch, neutral
Do not take your hand off the ________ when starting the engine of a motorcycle because the motorcycle may be in gear. - Correct Answer-clutch,
The throttle is located on - Correct Answer-The right hand grip.
To roll on the throttle means to, - Correct Answer-twist the throttle Towards You.
The clutch level is located on - Correct Answer-The left hand grip. When you squeeze in the clutch, - Correct Answer-there is no power going to the rear wheel.
The gearshift is located on - Correct Answer-the left footrest.
To use the gearshift, - Correct Answer-Lift your foot up for a higher gear, and press down for a lower gear.
Whens shifting gears, your foot only needs to move up or down _________ - Correct Answer-an inch or so.
Most motorcycles have how many gears? - Correct Answer-5 or 6
Neutral gear is located in between which gears? - Correct Answer-First and second gear.
The fuel supply valve is located - Correct Answer-under the Engine.
What does the fuel supply valve do? - Correct Answer-The fuel supply valve controls the amount of fuel to the engine tank
The Ignition Switch is often located near the - Correct Answer-instrument cluster.
Positions on the ignition switch include - Correct Answer-On, Off and Lock, and some include a Park position.
The Lock and Park positions on an ignition switch... - Correct Answer-engage the steering lock and allow the key to be removed.
The Park position on the ignition switch.. - Correct Answer-turns on the taillight for better
visibility when parked for a short time on the side of the road.
The Choke Control is located - Correct Answer-on the handlebars or near the engine.
What does the choke control do? - Correct Answer-It provides an enriched fuel mixture to help start a cold engine. It also raises the idle to permit the engine to warm quickly. It should be turned Off as soon as the engine idles smoothly without it.
Fuel Injected motorcycles do or not have a choke control? - Correct Answer-They do not.
Where is the engine cut-off switch? - Correct Answer-The Engine Cut-Off Switch can be
found near the right handgrip and is operated with the thumb.
What does the engine cut-off switch do? - Correct Answer-It allows you to shut off the engine without removing your hand from the handgrip.
