MAE 1351 EXAM 1 | Questions with 100% Correct Answers | verified

The engineering design process follows the same steps as the scientific discovery process, or scientific method. True? - No; there are major differences The term "IPS" in SolidWorks refers to... - measurement units To create an extrusion, I must first draw a sketch on a surface. True? - Yes, but the surface must be flat What are the fundamental types of sketch constraints? - Geometrical and dimensional To clock a hexagonal feature so that it rests horizontally on one side, I would... - Apply a horizontal constraint To create a revolved feature, the profile and the axis of the revolution must be what? - Coplanar To create a solid of revolution, I must... A) Select a plain line from the sketch to use as an axis B) Make an axis in the sketch using a construction line C) Use reference geometry to make an axis D) Any of the above will work - D) Any of the above will work I have a distance in my sketch preceded by a "sigma" symbol. This means... - It is a dimension driven by a parametric formula Graphical User Interface (GUI) - The format of information on the visual display of a computer, giving its user control of the input, output, and editing of the information