NFPA 921 Chapter 13 Safety Test Questions and Answers All Correct

NFPA 921 Chapter 13 Safety Test Questions and Answers All Correct found in concentrations nearly twice as high as its limit of 0.1 PPM - ANSWER formaldehyde all public and private sector employers have a responsibility to provide a safe workplace and to protect their employees from recognized hazards as required under the - ANSWER General Duty Clause of the Occupational Safety and Health Administration identifying hazards not only helps to determine the appropriate level of personal protective clothing and equipment needed to adequately protect investigators, but it also can be used toidentify appropriate __________________ - ANSWER training and education needs __________________ is based on the determination that a potential hazard always exist at every scene - ANSWER Hazard prevention and control hazards are either eliminated or managed by the implementation of standard operating procedures and work practices that are outline effective _____________ and________________ - ANSWER engineering controls and PPE an effective training and education program addresses the safety and health responsibilities of - ANSWER all Personnel throughout the organization including supervisor for specific guidance on developing an effective risk management/health and safety program for their organization investigators should refer to - ANSWER NFPA 1500 used by fire departments in both class A and Class B fires - ANSWER suppression foam the type of signal and evacuation location should be discussed during the ______________ and when new investigators arrive - ANSWER the first safety meeting the electrical service should be disconnected or the appropriate circuits - ANSWER isolated verification power has been disconnected should be done personally with the use of a - ANSWER voltmeter when utilizing voltage testing equipment it is imperative that the testing device be rated for voltage supply __________ - ANSWER to the structure