OSHA 10 - Material Handling Test with all answers correct

OSHA 10 - Material Handling Test with all answers correct Question 1: Mechanical material handing involves using your body to complete a task such as carrying a heavy tool or stacking boxes. Question 2: Which of the following is an example of mechanical materials handling? Question 3: What are some of the most common material handing hazards as cited by workers? a) Falling Objects b) Faulty Equipment c) Lifting large items d) Unbalanced loads e) Bending and turning Question 4: In the previous case study, what could the employer have done to prevent the material hazard? a) Have an injury prevention plan in place b) Start and maintain a training program c) Add some form of external support the paper bales Question 5: What is the most common injury caused by materials handling hazards? Question 6: Which of the following motions is commonly cited as a cause for back injuries? a) Bending b) Pushing c) Lifting Question 7: Make sure to keep ___________ clear of obstructions to prevent worker injuries and damaged materials. Question 8: Bad housekeeping can lead to a disorderly worksite, which can lead to a decrease in productivity and an increase in workplace injuries. Question 9: Which of the following openings does not require a guardrail? Question 10: Around 20 to 25 percent of forklift-related injuries were related to __________. Question 11: Ergonomics is based on the principle that the job should be adapted to fit the person rather than forcing the person to fit the job. Question12: When lifting a load, you should always: Question13: To prevent potential hazards when storing materials, workers should join materials that are non-compatible. Question 14: When storing flammable materials, flammable liquids must be: Question 15: Bags, containers and bundles stored in tiers must be ______________ so that they are stable and secure against sliding or collapse. a) Stacked b) Blocked c) Interlocked d) Limited in height Question 16: Rigging equipment should be proof tested _________ use to ensure it can handle the loads it will be used for. Question 17: Which of the following is not considered safe when storing materials? Question 18: Proper lifting techniques include: a) Never bend at the waist c) Keep the load close to your body d) Lift with your legs e) Keep the load away from your body Question 19: Which of the following injuries can be avoided with proper materials handing training? a) Strains and sprains b) Being struck by falling objects c) Being caught in a pinch point Question 20: Which of the following is an example of personal protective equipment that is useful in preventing foot injuries when handling materials? Question 21: No employee should handle materials unless they have been properly trained in how to do so safely? Question 22: Utilizing proper staging and housekeeping, employers must ensure that all aisles and passageways have: a) Plenty of room for materials to be transported mechanically b) Enough clearance for materials c) No obstructions or tripping hazards Question 23: The critical parts of a crane, such as operating mechanisms and system components, must be inspired __________ for any issues or damage. Question 24: Flammable liquids must be separated from other materials by a fire wall. Quiz Question 25: Which of the following motions is commonly cited as a cause for back injuries?