Fire Apparatus Driver/Operator - MWS Challenge Review- 98 QUESTIONS- WITH COMPLETE SOLUTIONS

Identify TWO correct statements about conducting a daily inspection of an MWS apparatus equipped with a fire pump correct answer: A. Check to make sure the auxiliary fuel tank is at least 1/2 full B. Operates the pump drive control - Correct Answer C. Ensure that the fire pump and booster lines are full D. Check the pump gearbox oil level E. Confirm that the foam tank level is full - Correct Answer Place the steps for Part II of the pressure control test in the correct order correct answer: 1. Set the fire pump so that it is discharging at a net pump discharge pressure of 150 psi. 2. Reduce the pumping engine throttle until the net pump discharge pressure drops to 90 psi. 3. Set the pressure control device to maintain the discharge pressure at 90 psi. 4. Close the flowing valves one at a time. 5. The pump discharge pressure should rise no more than 30 psi when all the valves are closed. The Key thing to remember when conducting an inspection of an MWS apparatus is to: correct answer: A. Be systematic - Correct Answer B. Document everything C. Walk in a clockwise directing starting from the driver's cab D. Verify that you are inspecting the correct MWS apparatus When conducting a service test using a static water source, you must have ____ Feet of hard suction hose for drafting correct answer: A. 20 - Correct Answer B. 40 C. 50 D. 30 All of the following are important reasons for maintainin