CCNA practice test| 80 questions| WITH COMPLETE SOLUTIONS

What is the show command to view the reported distance to a network on a router? CORRECT ANSWERS: Command: show ip eigrp topology The lines to look for are: P 1.1.1.0/24, 1 successors, FD is via 10.10.10.10 (/), FastEthernet0/0 The Feasible Distance (FD) is , and the reported distance or Advertised distance (AD) is What is the show command to view all IP Service Level Agreement (SLA) settings? CORRECT ANSWERS: Command: show ip sla configuration The lines to look for are: Type of operation to perform: icmp-echo Target address/Source address: 1.1.1.1/10.10.10.1 You would analyze this output to determine the type of operation and IP addresses of IP SLA. You would use the icmp-echo operation to check reachability. It is very similar to the ping command. You can specify some additional options such as frequency and source interface if needed. What is the show command to view how many times IP SLA has been executed successfully on a router? CORRECT ANSWERS: Command: show ip sla statistics The lines to look for are: Number of successes: 146 To configure IP SLA use these commands: ip sla 1 icmp-echo 1.1.1.1 source-interface FastEthernet0/0 frequency 5 ip sla schedule 1 life 5000 start-time now What is the show command to view HSRP priority of a router? CORRECT ANSWERS: Command: show standby brief or show standby