ASNT Level III Basic exam questions and answers 2023

ASNT Level III Basic exam questions and answers 2023SNT-TC-1A is not intended to be used as a strict specification. Which of the following statements is true concerning the usage of SNT-TC-1A? Written and stated in general terms The SNT-TC-1A Interpretation Panel will respond to inquiries about SNT-TC-1A. The inquiry must be: May engage an outside service but is, nevertheless, responsible for the certification of the company's NDT personnel With regard to the training of NDT personnel, the employer: To establish their own written practice that must be used as a strict specification. SNT-TC-1A is intended as a guideline for employers: The employer should review the detailed recommendations and modify them as necessary to meet its particular needs. The following is a statement in SNT-TC-1A "It is recognized that these guidelines may not be appropriate for certain employers; circumstances and / or applications." What should be done if the guidelines are not appropriate? The individual's employer. Who should be responsible to assess whether or not an individual should be qualified and certified who does not perform NDT, but monitors and evaluates NDT? Holographic testing To which of the following NDT methods is SNT-TC-1A currently not applicable With flexibility and reason ASNT intended that the recommendations of SNT-TC-1A be applied The employer. Of the following, which is most appropriate to determine the needs to qualify and certify personnel whose only NDT function is to operate digital thickness equipment. Written testimony of qualification. Certification is It has been specified by the customer. Use of SNT-TC-1A is mandatory when: Level I, II, III. The basic levels of qualification recommended by SNT-TC-1A are: Weather any NDT personnel should be qualified and certified depends solely upon the needs of the employer and the requirements of the employer's customers or clientele. Should personnel that operate ultrasonic digital thickness measurement equipment to qualified and certified The Trainee may not conduct nondestructive test independently and may not report test results According to the recommendations of SNT-TC-1A which of the following is true concerning a Trainee's activities? Must train and examine the Level I and II personnel in his or her organization. According to SNT-TC-1A, which of the following is not true for a Level III? Specific calibrations, Specific nondestructive test, specific evaluations, and write reports of test results. According to written instructions, an NDT Level I may be qualified to perform: Yes, the intent in SNT-TC-1A is that the Level I may perform the above functions provided that they are in accordance with written instruction of a Level III or designee. May a Level I independently perform, evaluate and sign for results of nondestructive test with supervision and guidance from a Level II or III? The qualifications for Level III equal and exceed those of Level II. Which of the following statements is true concerning the definitions of Trainee, Level I, II and III in SNT-TC-1A? Establish techniques Which of the following is not within the scope of activities of a Level II individual, as recommended in SNT-TC-1A? My conduct on the job training and guidance of Level I personnel. A recommended in SNT-TC-1A, a Level II: The Level III shall be capable of evaluating test results in terms of codes standards and specifications. According SNT-TC-1A which of the following is true for a Level III? The employer. In Accordance with SNT-TC-1A, who is responsible for establishing a written practice for the control and administration of NDT personnel training, examination and certification? Should be described in the employer's written practice only if they are different form SNT-TC-1A recommendations. The responsibility of each level of certification for determining the acceptability of materials or components: Training, experience and education. What factors are to be considered to ensure that a candidate for certification in NDT understands the principles and procedures involved? SNT-TC-1A does not currently provide a recommendation regarding overtime. As recommended in SNT-TC-1A, which of the following is true?