Half-life Gizmo-REVISED ANSWERS-LATEST UPDATE 2022

Half-life Gizmo-REVISED ANSWERS-ALL CORRECT.Name: Katheryn Castillo Class: Period 4 2022 Student Exploration: Half-life Vocabulary: daughter atom, decay, Geiger counter, half-life, isotope, neutron, radiation, radioactive, radiometric dating Prior Knowledge Questions (Do these BEFORE using the Gizmo.) 1. Have you ever made microwave popcorn? If so, what do you hear while the popcorn is in the microwave? I can hear the kernels of the popcorn popping 2. If you turn the microwave on for two minutes, is the rate of popping always the same, or does it change? Explain. I think the rate of the popping stays the same, if you put 2 minutes on a microwave and start it I think the bag of popcorn can all be popped and ready to eat in 2 minutes Gizmo Warm-up Like an unpopped kernel in the microwave, a radioactive atom can change at any time. Radioactive atoms change by emitting radiation in the form of tiny particles and/or energy. This process, called decay, causes the radioactive atom to change into a stable daughter atom. The Half-life Gizmo allows you to observe and measure the decay of a radioactive substance. Be sure the sound is turned on and click Play ( ). 1. What do you see and hear? I heard some sort of popping noise and I saw all of the radioactive atoms turn into Daughter atoms Note: The clicking sound you hear comes from a Geiger counter, an instrument that detects the particles and energy emitted by decaying radioactive atoms. 2. What remains at the end of the decay process? Everything that once was Radioactive atoms are now Daughter atoms 3. Is the rate of decay fastest at the beginning, middle, or end of the process? The rate of decay is fastest at the beginning of the process Get the Gizmo ready: Activity A: • Click Reset ( ). Be sure that User chooses halfDecay curves life and Random decay are selected. • Check that the Half-life is 20 seconds and the Number of atoms is 128. Question: How do we measure the rate of radioactive decay? 1. Observe: Select the BAR CHART on the right side of the Gizmo and click Play. A. What happens to the numbers of radioactive and daughter atoms as the simulation proceeds? The number radioactive atoms goes down as they turn into daughter atoms and in turn the number of daughter atoms goes up. B. Do the numbers of radioactive and daughter atoms change at the same rate throughout the simulation? Explain. Yes, every time a radioactive pops per say it turns into daughter 2. Experiment: Click Reset, and select the GRAPH tab. Run a simulation with the Half-life set to 5 seconds and another simulation with the Half-life set to 35 seconds. Sketch each resulting decay curve graph in the spaces below. Half-life = 5 seconds Half-life = 35 seconds 3. Interpret: How does the Half-life setting affect how quickly the simulated substance decays? The less time there is for the Half-life the faster the radioactive atoms turn into daughter atoms. (Activity A continued on next page) Activity A (continued from previous page) 4. Collect data: Click Reset. Change the Half-life to 10 seconds and click Play. Select the TABLE tab and record the number of radioactive atoms at each given time below. 0 s: 128 10 s: 69 20 s: 30 30 s: 21 40 s: 8 50 s: 3 5. Analyze: What pattern, if any, do you see in your data? The longer it goes on the smaller the amount of radioactive atoms get and it might take longer than 50s to get the number to zero radioactive atoms 6. Revise and repeat: Use your data from #4 above to fill in the first line of the data table below. Then repeat the experiment four more times. Calculate the average number of radioactive atoms for each time. Trial 0 s 10 s 20 s 30 s 40 s 50 s 8 3 7 3 11 10 8 5 8 0 Averages: 128 7. Analyze: A half-life is defined as the amount of time it takes for half of the radioactive particles to decay. For the simulated substance, every 10 seconds represents one half-life. How does your data demonstrate the definition of a half-life? The radioactive atoms go down about 10 each time for almost every trail 8. Revise and repeat: Click Reset. Real radioactive samples will contain billions of radioactive atoms. To model the decay of a large sample, change from Random decay to Theoretical decay on the SIMULATION pane. Click Play and record the numbers of radioactive atoms: 0 s: 128 10 s: 64 20 s: 32 30 s: 17 40 s: 6 50 s: 3 How does this data demonstrate the meaning of half-life? Depending on the half-life, is the amount of radioactive forming into daughter atoms Introduction: Different isotopes of the same element have the same number of protons but different numbers of neutrons in the nucleus. Some isotopes are radioactive. Question: How do we find the half-life of a radioactive isotope? 1. Observe: Select the GRAPH tab, and click Play. Based on the graph, what is your estimate of the half-life of isotope A? I think that is a very low number because at the beginning it was fast 2. Measure: Turn on the Half-life probe. Use the probe to measure how long it takes for exactly one-half of the original radioactive atoms to decay. What is the exact half-life of isotope A? 3. Collect data: In the first row of the table below, write how many seconds represent one halflife, two half-lives, and so forth. On the next row, predict the number of radioactive atoms that will be present at each time. Then use the probe to find the actual values. Half-life 0 1 2 3 4 5 Time (seconds) 50 Predicted # radioactive atoms 0 8 3 6 9 10 Actual # radioactive atoms 39 4. Calculate: Calculate the percentage of radioactive atoms that are left after each half-life. Half-life 0 1 2 3 4 5 Percentage radioactive atoms 94% 84% 64% 50% 39% 0% 5. Apply: Suppose you found a material in which 12.5% of the original radioactive atoms were present. If the half-life is 47 years, how old is the material? 47 years old` Get the Gizmo ready: • Click Reset. • Select Isotope A from the left drop-down menu. • Check that Theoretical decay is selected. Activity B: Measuring halflife (Activity B continued on next page) Activity B (continued from previous page) 6. Apply: Use the Gizmo to find the half-life of Isotope B. What is it? 20s 7. Practice: Click Reset. Select the Mystery half-life from the left menu. In this setting, the half-life will be different each time you run the simulation. Run at least three trials. In each trial, measure the half-life using the Half-life probe on the graph. When you have found the half-life, click the camera ( ) icon. Right-click the image, and click Copy. Then paste the image into a blank document, and label each image with the halflife. Print out this document and turn it in with this sheet. 8. Explore: Use the Gizmo to explore whether the number of atoms present affects the half-life that you measure. Describe your findings below: No it doesn’t, it doesn’t’ affect anything really. 9. Extend your thinking: The slow decay of radioactive materials can be used to find the age of rocks, fossils, and archaeological artifacts. In a process called radiometric dating, scientists measure the proportions of radioactive atoms and daughter atoms in an object to determine its age. Carbon-14 is a useful isotope because it is found in wood, ash, bone, and any other organic materials. You can use the Half-life Gizmo to model the decay of Carbon-14, which has a half-life of approximately 6,000 years (actual value is 5,730 years). In the Gizmo, select User chooses half-life and Theoretical decay. Set the Half-life to 6 seconds (to represent 6,000 years) and the Number of atoms to 100. Use the Gizmo to estimate the age of each of the objects below. For these questions, each second in the Gizmo represents 1,000 years. Description Age (years) Egyptian papyrus with 63% of its original carbon-14 atoms 45 Aboriginal charcoal with 22% of its original carbon-14 atoms. 36 Mayan headdress with 79% of its original carbon-14 atoms 58 Neanderthal skull with 3% of its original carbon-14 atoms 69