NCCCO Telescopic Boom Crane-
Swing Cab (TLL) – QUESTIONS
MERGED WITH CORRECT COMPLETE
SOLUTIONS || ALREADY GRADED A+
|| 2026-2027 LATEST UPDATE!!!
A crane is operating with a long boom, on outriggers, on uneven
ground. Under these conditions it is important to - ANSWER-Block
under the float or pad to achieve a 90-degree angle between the
cylinder rod and the float or pad
What is the purpose of a boom length indicator? - ANSWER-Indicates
the extended length of boom
According to OSHA 1926 subpart cc, floats/pads must be fastened to
the outrigger/stabilizers when - ANSWER-They are in use
A crane's jib is offset 15 degrees versus its original 0 degree offset and
the boom angle remains unchanged; the load radius will - ANSWER-
Increase
When leaving telescopic boom cranes unattended overnight or for
longer periods, the boom should be - ANSWER-Fully retracted and
stowed
Swing Cab (TLL) – QUESTIONS
MERGED WITH CORRECT COMPLETE
SOLUTIONS || ALREADY GRADED A+
|| 2026-2027 LATEST UPDATE!!!
A crane is operating with a long boom, on outriggers, on uneven
ground. Under these conditions it is important to - ANSWER-Block
under the float or pad to achieve a 90-degree angle between the
cylinder rod and the float or pad
What is the purpose of a boom length indicator? - ANSWER-Indicates
the extended length of boom
According to OSHA 1926 subpart cc, floats/pads must be fastened to
the outrigger/stabilizers when - ANSWER-They are in use
A crane's jib is offset 15 degrees versus its original 0 degree offset and
the boom angle remains unchanged; the load radius will - ANSWER-
Increase
When leaving telescopic boom cranes unattended overnight or for
longer periods, the boom should be - ANSWER-Fully retracted and
stowed
