NH Boating Exam
Study online at https://quizlet.com/_efe5w
1. displacement hull round-bottom hull that moves the water out of the way
2. planing hull flat bottom or vee bottomed hull that glides above the water
3. outboard engines portable, self-contained package of an engine, gear case, and pro-
peller that is attached to the boat
4. inboard engine engine mounted inside the hull's midsection
5. stern drives combine features of inboard/outboard engines
6. jet drives propel a vessel by forcing a jet of water out the back of the boat
7. 4 Length Classes Class A, Class 1, Class 2, Class 3
8. 4 Types of Engines Inboard, Outboard, Stern Drive, Jet Drive
9. Stern Drive/Inboard en- automotive engines adapted for marine use
gines
10. personal water craft inboard vessel less than 16 feet in length
11. impeller device used to pump and force water under pressure through a
steering nozzle at the rear of a vessel
12. Rule of Thumb to prevent 1/3 out, 1/3 in, and 1/3 in reserve
running out of fuel on PWC
13. tongue weight amount of a loaded trailer's weight that presses down on the towing
hitch
14. wind/current toward the stern line off first
dock
15. anchor line should be 7-10 times the depth of the water
1/1