CSX CONDUCTOR ACTUAL FINAL QUESTIONS AND
ANSWERS SET A+
✔✔when riding a car, maintain 3 points of contact, be prepared for unexpected
movement, slack actions and? - ✔✔Face direction of movement
✔✔Do not ride on a car with a grab bar that is less than ___________ above the ground
- ✔✔12"
✔✔What is required when riding a car approaching a close clearance? - ✔✔dismount
the car prior to reaching the close clearance
✔✔What can be used to clear foreign materials from a switch? - ✔✔1) Broom. 2) Switch
✔✔Employees are prohibited from using alcohol... - ✔✔1) On duty, or reporting for duty.
2) on CSX Property, Vehicles, or facilities provided by CSX
✔✔When working with air hoses, which of the following apply? - ✔✔1) Do not extend
over the drawbar when adjusting hoses. 2) make certain that BOTH anglecocks are
closed before adjusting hoses with hands.
✔✔When handling a EOT device, an employee must... - ✔✔1) Secure EOT air hose by
s hook if available. 2) Do not place the EOT where it may become a tripping hazard
✔✔When lifting objects what safety steps must be taken? - ✔✔1) Never use Excessive
Force. 2) Assume a balanced posture.
✔✔Your Coworker is acting in an unsafe manner, what should you do? - ✔✔Warn the
employee of their unsafe behavior
✔✔When must an employee report an injury? - ✔✔Immediately or prior to leaving CSX
Property.
, ✔✔What hazards must be avoided when performing tasks? - ✔✔1) Pinch Points. 2)
Excessive Force
✔✔When is CSX Ear Protection required? - ✔✔1) when within 100' of a locomotive in
any position other than idle. 2) When providing flag protection at a crossing or grade.
✔✔when outside of an office environment, boots must have what? - ✔✔Oil Resistant
Soles
✔✔When are CSX Safety Glasses required? - ✔✔1) When on or about tracks or
equipment on tracks. 2)when riding in a locomotive with the windows open
✔✔whenever possible, how must air hoses be separated? - ✔✔After closing
"Appropriate Anglecock" allow train movement to separate hoses
✔✔If couplers are not aligned, how much space is required between the cars before
they can be safely adjusted? - ✔✔50'
✔✔When using a radio, what features are required? - ✔✔1) Chest type radio harness.
2) Holster or radio clip with lapel mic
✔✔When applying a side mounted hand brake, an employee must have stable footing
and what? - ✔✔1) Be facing the car. 2) Use one hand to operate the brake, and the
other hand placed firmly on the car
✔✔Hours of Service 1545 - ✔✔1100
✔✔How much rest is required after 10 hours of work? - ✔✔10 hours
✔✔what is the maximum amount of time allowed in train service? - ✔✔12 hours
✔✔when mounting the side of a moving car, employees must, face the car, maintain 3
points of contact, and what? - ✔✔Place the defined heel on the bottom rung and brace
feet on the side rails
✔✔Define "Limited Speed" - ✔✔45mph
✔✔Define "Medium Speed" - ✔✔30 mph
✔✔Define "Slow Speed" - ✔✔15 mph
ANSWERS SET A+
✔✔when riding a car, maintain 3 points of contact, be prepared for unexpected
movement, slack actions and? - ✔✔Face direction of movement
✔✔Do not ride on a car with a grab bar that is less than ___________ above the ground
- ✔✔12"
✔✔What is required when riding a car approaching a close clearance? - ✔✔dismount
the car prior to reaching the close clearance
✔✔What can be used to clear foreign materials from a switch? - ✔✔1) Broom. 2) Switch
✔✔Employees are prohibited from using alcohol... - ✔✔1) On duty, or reporting for duty.
2) on CSX Property, Vehicles, or facilities provided by CSX
✔✔When working with air hoses, which of the following apply? - ✔✔1) Do not extend
over the drawbar when adjusting hoses. 2) make certain that BOTH anglecocks are
closed before adjusting hoses with hands.
✔✔When handling a EOT device, an employee must... - ✔✔1) Secure EOT air hose by
s hook if available. 2) Do not place the EOT where it may become a tripping hazard
✔✔When lifting objects what safety steps must be taken? - ✔✔1) Never use Excessive
Force. 2) Assume a balanced posture.
✔✔Your Coworker is acting in an unsafe manner, what should you do? - ✔✔Warn the
employee of their unsafe behavior
✔✔When must an employee report an injury? - ✔✔Immediately or prior to leaving CSX
Property.
, ✔✔What hazards must be avoided when performing tasks? - ✔✔1) Pinch Points. 2)
Excessive Force
✔✔When is CSX Ear Protection required? - ✔✔1) when within 100' of a locomotive in
any position other than idle. 2) When providing flag protection at a crossing or grade.
✔✔when outside of an office environment, boots must have what? - ✔✔Oil Resistant
Soles
✔✔When are CSX Safety Glasses required? - ✔✔1) When on or about tracks or
equipment on tracks. 2)when riding in a locomotive with the windows open
✔✔whenever possible, how must air hoses be separated? - ✔✔After closing
"Appropriate Anglecock" allow train movement to separate hoses
✔✔If couplers are not aligned, how much space is required between the cars before
they can be safely adjusted? - ✔✔50'
✔✔When using a radio, what features are required? - ✔✔1) Chest type radio harness.
2) Holster or radio clip with lapel mic
✔✔When applying a side mounted hand brake, an employee must have stable footing
and what? - ✔✔1) Be facing the car. 2) Use one hand to operate the brake, and the
other hand placed firmly on the car
✔✔Hours of Service 1545 - ✔✔1100
✔✔How much rest is required after 10 hours of work? - ✔✔10 hours
✔✔what is the maximum amount of time allowed in train service? - ✔✔12 hours
✔✔when mounting the side of a moving car, employees must, face the car, maintain 3
points of contact, and what? - ✔✔Place the defined heel on the bottom rung and brace
feet on the side rails
✔✔Define "Limited Speed" - ✔✔45mph
✔✔Define "Medium Speed" - ✔✔30 mph
✔✔Define "Slow Speed" - ✔✔15 mph
