VIRGINIA HEAVY HIGHWAY BATCH 1 EXAM || MOST RECENT EXAM 2026|2027 ACTUAL COMPLETE REAL EXAM QUESTIONS AND CORRECTLY WELL DEFINED ANSWERS (VEERIFIED ANSWERS) ALREADY GRADED A+ | GUARANTEED SUCCESS!! NEWEST EXAM | JUST RELEASED!!

VIRGINIA HEAVY HIGHWAY BATCH 1 EXAM || MOST
RECENT EXAM 2026|2027 ACTUAL COMPLETE REAL
EXAM QUESTIONS AND CORRECTLY WELL DEFINED
ANSWERS (VEERIFIED ANSWERS) ALREADY
GRADED A+ | GUARANTEED SUCCESS!!
NEWEST EXAM | JUST RELEASED!!



How do you store beams at site - ANSWER-Laid on their
side or in the
orientation in which they were
shipped


What should be checked before moving a load with a crane -
ANSWER-The destination area should be checked for
sufficient clearance and floor strength


The depth of excavation that requires a ladder is - ANSWER-4
feet


When securing a low pressure tank fitting, what grade bolt
should be used -
ANSWER-
Grade 8


What is not considered a part of the tank - ANSWER-
structural beam

, How level does a concrete pad need to be under a tank -
ANSWER-+/- 1/8"


What size berm is needed on a tank pad - ANSWER-5 foot


What is the maximum punitive damages assessed for excavating
without having
the utilities marked? - ANSWER-
$10,000


Asphault should be rolled? - ANSWER-On the hot side with a
small overlap on
the cold
side


A tank should have a relief valve located where? - ANSWER-
At the top


All tanks shall be outfitted with - ANSWER-Pressure relief
valves (or safety
valve)


A tank inlet and outlet shall be - ANSWER-the same size +/-


Recaimed asphault containing more than 0.1% tar is
considered - ANSWER-
Hazordous
waste