FDOT Earthwork LEVEL Exam Questions
and
Answers Verified Solutions Latest
Update
Question:
For concrete slabs, the minimum curing time at temperature above 40 ˚ F should be at
least_____..
Answer:
Question:
Deformations on rebar_____..
Answer:
Question:
Concrete mixers with _______________ or larger loading skips shall be equipped with
mechanical devices to clear the skip of materials and guardrails on each side of the
skip..
Answer:
Question:
Utility-grade studs in a bearing partition wall supporting two stories above and a ceiling
and a roof shall be spaced not more than_______ inches on center..
Answer:
Question:
Glass block panels shall be provided with expansion joints along____ at all structural
supports..
Answer:
, Question:
Restraints placed at 900 to the Top Chord members prevent______..
Answer:
Question:
The minimum staple length for fastening ½" gypsum panels is _______ inches..
Answer:
Question:
Foundation walls of rough or random rubble stone shall not be less than _____ inches
thick.
Answer:
Question:
When masonry blocks are stacked higher than 6 feet, _______..
Answer:
Question:
Which of the following is a characteristic of structural lightweight aggregate concrete..
Answer:
Question:
When using screws to install gypsum panels over existing solid wall surfaces, the
screws must penetrate the underlying wood framing not less than ____ inch..
Answer:
Question:
The minimum R-value for ceilings as required by the Florida Building Code is
_____________..
Answer:
and
Answers Verified Solutions Latest
Update
Question:
For concrete slabs, the minimum curing time at temperature above 40 ˚ F should be at
least_____..
Answer:
Question:
Deformations on rebar_____..
Answer:
Question:
Concrete mixers with _______________ or larger loading skips shall be equipped with
mechanical devices to clear the skip of materials and guardrails on each side of the
skip..
Answer:
Question:
Utility-grade studs in a bearing partition wall supporting two stories above and a ceiling
and a roof shall be spaced not more than_______ inches on center..
Answer:
Question:
Glass block panels shall be provided with expansion joints along____ at all structural
supports..
Answer:
, Question:
Restraints placed at 900 to the Top Chord members prevent______..
Answer:
Question:
The minimum staple length for fastening ½" gypsum panels is _______ inches..
Answer:
Question:
Foundation walls of rough or random rubble stone shall not be less than _____ inches
thick.
Answer:
Question:
When masonry blocks are stacked higher than 6 feet, _______..
Answer:
Question:
Which of the following is a characteristic of structural lightweight aggregate concrete..
Answer:
Question:
When using screws to install gypsum panels over existing solid wall surfaces, the
screws must penetrate the underlying wood framing not less than ____ inch..
Answer:
Question:
The minimum R-value for ceilings as required by the Florida Building Code is
_____________..
Answer: