ISQS 3344 MAIN EXAMINATION SET 2026/2027
QUESTIONS AND ANSWERS RATED A+
✔✔Choose the most accurate statement regarding a cellular layout. - ✔✔It is not
designed according to the functional characteristics of equipment.
✔✔The usual layout of facilities in a legal office in an example of which type of layout? -
✔✔Process
✔✔Which layout is an arrangement of physical facilities predicated on the order of
operations performed during the delivery of a service or manufacturing of a good? -
✔✔Product layout
✔✔Which term describes the amount of time between successive outputs coming off an
assembly line? - ✔✔Cycle Time
✔✔The vertical expansion of job duties granting worker more responsibility is _____. -
✔✔Job enrichment
✔✔Which of the following choices is a technique where tasks are grouped among
workstations such that each workstation ideally has the same amount of work? -
✔✔Assembly-Line balancing
✔✔With the goal being an improvement in safety and productivity, _______ is the
concept of designing equipment, workstations, computers, workplaces, instruments, and
so on with the physical capabilities of people taken into consideration. - ✔✔ergonomics
✔✔What is true of process layouts when comparing them to product layouts? - ✔✔They
require a lower investment in equipment.
✔✔Tammy plans the facility layout of her new shop which will sell various healthcare
industry machines. The arrangement of the machines is laid out in such a way that
machines of similar function are placed together. Which facility layout did Tammy use
for her shop? - ✔✔A process layout
✔✔An assembly line has 30 activities that need to be balanced. The total amount of
time for all 30 activities is 45 minutes. The line operates for 8 hours per day. What is the
cycle time needed to achieve an output rate of 200 units per day? - ✔✔2.4 minutes
✔✔Which type of layouts typically require extensive planning and control compared to
other types of layouts? - ✔✔Fixed-position layouts
, ✔✔Any given software application has three components. Choose the option below that
is not one of these three. - ✔✔Module management
✔✔Any given software application has three components. Which one is housed
exclusively in the application server? - ✔✔Business logic management
✔✔Tom Hanks, on a whim, wants to know the term that's defined as using the internet
and technology to provide facilities that create and deliver exchange, entertainment,
information, place and time value to customers along with supporting the sale of goods.
What do you tell him? - ✔✔E-service
✔✔Which sentence states a truth about radio-frequency identification (RFID) tags? -
✔✔They can bring visibility and enhance security to the handling transportation of
products.
✔✔What type of machine tools allow a machinist's skills to be replicated by a
programmable device that controls the movements of a tool used to make complex
shapes? - ✔✔Numerical control (NC)
✔✔Which of the following is an example of soft technology? - ✔✔Artificial intelligence
program
✔✔AudioBlast, an audio electronics company, is presently in the preproduction stage of
launching one of their new stereo systems. In order to analyze the feasibility of the
product, AudioBlast adopts an integrated system that allows it to manufacture the
product before it physically exists, that is, the system allows AudioBlast to finalize the
design of the stereo, analyze it, and do a test-run. In this context, AudioBlast is using
a(n) ________. - ✔✔Computer-aided engineering (CAE) system
✔✔Tap 'N Chill is an appliance company. They design, produce, and assemble ice
dispensers. The complete process is controlled by programmable robots that are linked
to computers. These computers direct the robots to the appropriate task. In this
scenario, Tap N' Chill uses a(n) _______ to produce its goods. - ✔✔Flexible
manufacturing system
✔✔With a customer relationship management system, the primary focus shifts away
from managing products. Instead, the focus turns to managing _______. -
✔✔customers
✔✔Consider what you know about customer relationship management (CRM). Choose
the statement that is true. - ✔✔A typical CRM system includes market segmentation
and analysis.
QUESTIONS AND ANSWERS RATED A+
✔✔Choose the most accurate statement regarding a cellular layout. - ✔✔It is not
designed according to the functional characteristics of equipment.
✔✔The usual layout of facilities in a legal office in an example of which type of layout? -
✔✔Process
✔✔Which layout is an arrangement of physical facilities predicated on the order of
operations performed during the delivery of a service or manufacturing of a good? -
✔✔Product layout
✔✔Which term describes the amount of time between successive outputs coming off an
assembly line? - ✔✔Cycle Time
✔✔The vertical expansion of job duties granting worker more responsibility is _____. -
✔✔Job enrichment
✔✔Which of the following choices is a technique where tasks are grouped among
workstations such that each workstation ideally has the same amount of work? -
✔✔Assembly-Line balancing
✔✔With the goal being an improvement in safety and productivity, _______ is the
concept of designing equipment, workstations, computers, workplaces, instruments, and
so on with the physical capabilities of people taken into consideration. - ✔✔ergonomics
✔✔What is true of process layouts when comparing them to product layouts? - ✔✔They
require a lower investment in equipment.
✔✔Tammy plans the facility layout of her new shop which will sell various healthcare
industry machines. The arrangement of the machines is laid out in such a way that
machines of similar function are placed together. Which facility layout did Tammy use
for her shop? - ✔✔A process layout
✔✔An assembly line has 30 activities that need to be balanced. The total amount of
time for all 30 activities is 45 minutes. The line operates for 8 hours per day. What is the
cycle time needed to achieve an output rate of 200 units per day? - ✔✔2.4 minutes
✔✔Which type of layouts typically require extensive planning and control compared to
other types of layouts? - ✔✔Fixed-position layouts
, ✔✔Any given software application has three components. Choose the option below that
is not one of these three. - ✔✔Module management
✔✔Any given software application has three components. Which one is housed
exclusively in the application server? - ✔✔Business logic management
✔✔Tom Hanks, on a whim, wants to know the term that's defined as using the internet
and technology to provide facilities that create and deliver exchange, entertainment,
information, place and time value to customers along with supporting the sale of goods.
What do you tell him? - ✔✔E-service
✔✔Which sentence states a truth about radio-frequency identification (RFID) tags? -
✔✔They can bring visibility and enhance security to the handling transportation of
products.
✔✔What type of machine tools allow a machinist's skills to be replicated by a
programmable device that controls the movements of a tool used to make complex
shapes? - ✔✔Numerical control (NC)
✔✔Which of the following is an example of soft technology? - ✔✔Artificial intelligence
program
✔✔AudioBlast, an audio electronics company, is presently in the preproduction stage of
launching one of their new stereo systems. In order to analyze the feasibility of the
product, AudioBlast adopts an integrated system that allows it to manufacture the
product before it physically exists, that is, the system allows AudioBlast to finalize the
design of the stereo, analyze it, and do a test-run. In this context, AudioBlast is using
a(n) ________. - ✔✔Computer-aided engineering (CAE) system
✔✔Tap 'N Chill is an appliance company. They design, produce, and assemble ice
dispensers. The complete process is controlled by programmable robots that are linked
to computers. These computers direct the robots to the appropriate task. In this
scenario, Tap N' Chill uses a(n) _______ to produce its goods. - ✔✔Flexible
manufacturing system
✔✔With a customer relationship management system, the primary focus shifts away
from managing products. Instead, the focus turns to managing _______. -
✔✔customers
✔✔Consider what you know about customer relationship management (CRM). Choose
the statement that is true. - ✔✔A typical CRM system includes market segmentation
and analysis.
