FIREFIGHTER2 FINAL EXAM|VERIFIED QUESTIONS AND ANSWERS|GRADED A+
|LATEST 2026/2027
Which pneumatic tools are often used for delicate cutting operations and can cut case hardened locks
and steel? - ANSWER✔ Whizzer saws
Which proportioning method uses an external pump or head pressure to force foam concentrate into
the fire stream at the correct ratio for the water flow? - ANSWER✔ Premixing method
What is the term used to describe forward velocity pressure at a discharge opening while water is
flowing? - ANSWER✔ Flow pressure
Which of the following is NOT a question that would be asked concerning appliances during a residential
fire safety survey?
Are surge protectors being used?
Are appliances name brand?
Are electrical cords in good condition?
Are the units operating properly? - ANSWER✔ are appliances name brand?
Which type of pressure can be measured with a pitot tube and gauge? - ANSWER✔ Flow pressure
Proportioning methods: When would batch mixing not be effective? - ANSWER✔ On large incidents
because attack lines must be shut down when refilling an empty tank.
Water applied to ordinary combustibles usually _______. - ANSWER✔ Reduce flame spread
Which type of valves are used to control the flow from the hydrant? - ANSWER✔ Gate valves
, The _____ the wood, the easier to ignite and the faster it loses structural integrity. - ANSWER✔
Smaller
The threads on pump male discharge outlets are protected by fittings called _____ _____. -
ANSWER✔ Hose caps
Who should begin stabilization of a patient trapped inside a vehicle? - ANSWER✔ A rescuer with EMT
training
Name one element of patient removal: - ANSWER✔ Covering sharp edges
Fixed-temperature heat detectors rated at _____(*f)(*c) are common for living spaces. - ANSWER✔
165 | 76
Cribbing is most commonly used to _________. - ANSWER✔ stabilize objects
Which type of test should be preformed by private contractors or fire department personnel? -
ANSWER✔ Standard testing
Which proportioning method is used with portable extinguishers, wheeled, extinguishers, skid-mounted
twin-agent units, and vehicle mounted tank systems? - ANSWER✔ Premixing method
One of the most important practices to address to building occupants about fire safety is _______. -
ANSWER✔ making sure to maintain clear and unobstructed exit pathways
Normal pressure exiting a system before water is released from a hydrant is called ______. -
ANSWER✔ Static presssure
Energy created by moving parts on machines, such as belts and bearings - ANSWER✔ Mechanical
heat energy
|LATEST 2026/2027
Which pneumatic tools are often used for delicate cutting operations and can cut case hardened locks
and steel? - ANSWER✔ Whizzer saws
Which proportioning method uses an external pump or head pressure to force foam concentrate into
the fire stream at the correct ratio for the water flow? - ANSWER✔ Premixing method
What is the term used to describe forward velocity pressure at a discharge opening while water is
flowing? - ANSWER✔ Flow pressure
Which of the following is NOT a question that would be asked concerning appliances during a residential
fire safety survey?
Are surge protectors being used?
Are appliances name brand?
Are electrical cords in good condition?
Are the units operating properly? - ANSWER✔ are appliances name brand?
Which type of pressure can be measured with a pitot tube and gauge? - ANSWER✔ Flow pressure
Proportioning methods: When would batch mixing not be effective? - ANSWER✔ On large incidents
because attack lines must be shut down when refilling an empty tank.
Water applied to ordinary combustibles usually _______. - ANSWER✔ Reduce flame spread
Which type of valves are used to control the flow from the hydrant? - ANSWER✔ Gate valves
, The _____ the wood, the easier to ignite and the faster it loses structural integrity. - ANSWER✔
Smaller
The threads on pump male discharge outlets are protected by fittings called _____ _____. -
ANSWER✔ Hose caps
Who should begin stabilization of a patient trapped inside a vehicle? - ANSWER✔ A rescuer with EMT
training
Name one element of patient removal: - ANSWER✔ Covering sharp edges
Fixed-temperature heat detectors rated at _____(*f)(*c) are common for living spaces. - ANSWER✔
165 | 76
Cribbing is most commonly used to _________. - ANSWER✔ stabilize objects
Which type of test should be preformed by private contractors or fire department personnel? -
ANSWER✔ Standard testing
Which proportioning method is used with portable extinguishers, wheeled, extinguishers, skid-mounted
twin-agent units, and vehicle mounted tank systems? - ANSWER✔ Premixing method
One of the most important practices to address to building occupants about fire safety is _______. -
ANSWER✔ making sure to maintain clear and unobstructed exit pathways
Normal pressure exiting a system before water is released from a hydrant is called ______. -
ANSWER✔ Static presssure
Energy created by moving parts on machines, such as belts and bearings - ANSWER✔ Mechanical
heat energy
