Advanced Programmable Logic Mid-term
Study online at https://quizlet.com/_b5986a
1. In a subtract instruction, sources A and B can be the True
content of integer registers N7:0 and N7:1 respective-
ly.
2. In a multiply instruction, the result cannot be placed in False
the integer N7:2.
3. The destination in an add instruction must not be a False
register.
4. There are several math instructions that are available True
in the Allen-Bradley SLC 5/03,SLC 5/04, and SLC 5/05
processors.
5. In the math instruction, the ___________ must be a reg- destination
ister.
6. In the divide instruction, the content of source A--B
___________ is divided by the content of source _________.
7. In the add instruction, both sources can be registers
______________.
8. The ___________ instruction calculates the quotient that divide
results from dividing source A by source B.
9. The _____________ instruction calculates the difference subtract
between source A and source B.
10. MUL is the acronym for the __________ instruction. multiply
11. In the _____________ instruction, source A can be divided divide
by source B.
, Advanced Programmable Logic Mid-term
Study online at https://quizlet.com/_b5986a
12. CPT is the acronym for the ____________ instruction. compute
13. The ___________ instruction calculates the sum of source add
A and source B.
14. The ____________ instruction calculates the product of multiply
source A and source B.
15. The subtract (SUB) instruction has _____________ three
operands.
16. The add (ADD) instruction has _____________ operands. three
17. The ________________ in an add (ADD) instruction must destination
be a register.
18. At least one of the _______________ in a multiply instruc- sources
tion must be a register.
19. The _________________ in a subtract instruction must be destination
a register.
20. In the subtract instruction, source ________________ is B--A
deducted from source ______________.
21. You must energize a JMP coil to activate the JMP in- True
struction.
22. You must energize a MCR coil to activate the MCR False
instruction.
23. The states of the instructions that are jumped over False
change.
24. False
Study online at https://quizlet.com/_b5986a
1. In a subtract instruction, sources A and B can be the True
content of integer registers N7:0 and N7:1 respective-
ly.
2. In a multiply instruction, the result cannot be placed in False
the integer N7:2.
3. The destination in an add instruction must not be a False
register.
4. There are several math instructions that are available True
in the Allen-Bradley SLC 5/03,SLC 5/04, and SLC 5/05
processors.
5. In the math instruction, the ___________ must be a reg- destination
ister.
6. In the divide instruction, the content of source A--B
___________ is divided by the content of source _________.
7. In the add instruction, both sources can be registers
______________.
8. The ___________ instruction calculates the quotient that divide
results from dividing source A by source B.
9. The _____________ instruction calculates the difference subtract
between source A and source B.
10. MUL is the acronym for the __________ instruction. multiply
11. In the _____________ instruction, source A can be divided divide
by source B.
, Advanced Programmable Logic Mid-term
Study online at https://quizlet.com/_b5986a
12. CPT is the acronym for the ____________ instruction. compute
13. The ___________ instruction calculates the sum of source add
A and source B.
14. The ____________ instruction calculates the product of multiply
source A and source B.
15. The subtract (SUB) instruction has _____________ three
operands.
16. The add (ADD) instruction has _____________ operands. three
17. The ________________ in an add (ADD) instruction must destination
be a register.
18. At least one of the _______________ in a multiply instruc- sources
tion must be a register.
19. The _________________ in a subtract instruction must be destination
a register.
20. In the subtract instruction, source ________________ is B--A
deducted from source ______________.
21. You must energize a JMP coil to activate the JMP in- True
struction.
22. You must energize a MCR coil to activate the MCR False
instruction.
23. The states of the instructions that are jumped over False
change.
24. False
