2026/2027 Questions with Verified Answers Graded
A+
What is used as a guide for centerline painting?
traffic cones or paint marks
A "T" clear zone is laid out to mark ________.
A runway crater
Centerline Station Number One is located ________ from the initial offset
centerline point.
200 feet
On a uni-diretional MOS, the highest numbered DTG marker must be on the
________ side of the MOS facing ________ the Primary Operational Threshold.
right, toward
The Operational Threshold will be determined by
,Unneeded traffic cones should be
stacked onto the truck for transport back to the staging area
The MOS is likely to expand in both length and width when
more craters are repaired
What is the best reason not to drive or step on freshly painted airfield lines?
It creates extra or confusing lines on the new MOS
What is the next step in the installation process once the necessary preparations are
accomplished to provide the PAPI units with a base at the proper elevation?
The PAPI unit locations must be verified using a surveying instrument
Which of the following includes a 40-inch high black circle on a bright orange
diamond-shaped face?
Aircraft Arresting System Marker
Under normal conditions, unless you are directed otheriwse, use ________ for the
design Approach Slope Angle.
, 3.00 degrees
What color is used for DTG markers?
Bright orange background with black border and numbers
The beginning point and all subsequent centerline cone placements should be
offset ________ feet to the left of the new centerline.
2
Fighter jets are generally classified in
TCH#1
The MOS marker that does not require sandbags or other ballast to stand alone is
the
Edge marker
How many DTG markers are in the MOS marking system?
18