OSHA Basic Orientation Plus (BOP) Practice
Test 3 Question and Answers with Rationales
Top rated Latest Version
Question 1*
A worker notices that a coworker has bypassed a machine guard to
speed up production. What should the worker do?
A. Ignore the situation because it is not their responsibility.
B. Bypass the guard as well.
C. Stop work if it is safe to do so, notify the coworker of the hazard, and
report it according to company procedures.
D. Wait until the next safety meeting to mention it.
*Correct Answer:* *C. Stop work if it is safe to do so, notify the
coworker of the hazard, and report it according to company
procedures.*
*Explanation:*
Removing or bypassing machine guards exposes workers to serious
caught-in and amputational hazards. Unsafe conditions should be
addressed immediately through the employer's reporting process.
,---
Question 2*
What is the primary purpose of a pre-task safety briefing?
A. To review payroll information.
B. To identify hazards, discuss controls, assign responsibilities, and
answer safety questions before work begins.
C. To assign overtime shifts.
D. To inspect employee uniforms.
*Correct Answer:* *B. To identify hazards, discuss controls, assign
responsibilities, and answer safety questions before work begins.*
*Explanation:*
A pre-task briefing helps ensure everyone understands the work plan,
hazards, required PPE, emergency procedures, and individual
responsibilities.
---
,Question 3*
If a portable ladder has a cracked side rail, you should:
A. Use it carefully for light-duty work.
B. Repair it with tape.
C. Remove it from service and tag it as defective.
D. Let another worker decide whether it is safe.
*Correct Answer:* *C. Remove it from service and tag it as defective.*
*Explanation:*
Damaged ladders must not be used. They should be tagged "Do Not
Use" and removed from service until repaired or replaced.
---
Question 4*
Which of the following best describes an "unsafe condition"?
A. Wearing safety glasses.
, B. A frayed electrical cord lying in a walkway.
C. Attending a toolbox talk.
D. Following Lockout/Tagout procedures.
*Correct Answer:* *B. A frayed electrical cord lying in a walkway.*
*Explanation:*
An unsafe condition is a hazardous physical condition that could lead to
an accident or injury if not corrected.
---
Question 5*
What should you verify before using a fire extinguisher?
A. That you have been trained, the extinguisher is appropriate for the
fire, and you have a safe escape route.
B. That the fire is spreading quickly.
C. That the building is completely evacuated.
D. That someone is recording the event.
Test 3 Question and Answers with Rationales
Top rated Latest Version
Question 1*
A worker notices that a coworker has bypassed a machine guard to
speed up production. What should the worker do?
A. Ignore the situation because it is not their responsibility.
B. Bypass the guard as well.
C. Stop work if it is safe to do so, notify the coworker of the hazard, and
report it according to company procedures.
D. Wait until the next safety meeting to mention it.
*Correct Answer:* *C. Stop work if it is safe to do so, notify the
coworker of the hazard, and report it according to company
procedures.*
*Explanation:*
Removing or bypassing machine guards exposes workers to serious
caught-in and amputational hazards. Unsafe conditions should be
addressed immediately through the employer's reporting process.
,---
Question 2*
What is the primary purpose of a pre-task safety briefing?
A. To review payroll information.
B. To identify hazards, discuss controls, assign responsibilities, and
answer safety questions before work begins.
C. To assign overtime shifts.
D. To inspect employee uniforms.
*Correct Answer:* *B. To identify hazards, discuss controls, assign
responsibilities, and answer safety questions before work begins.*
*Explanation:*
A pre-task briefing helps ensure everyone understands the work plan,
hazards, required PPE, emergency procedures, and individual
responsibilities.
---
,Question 3*
If a portable ladder has a cracked side rail, you should:
A. Use it carefully for light-duty work.
B. Repair it with tape.
C. Remove it from service and tag it as defective.
D. Let another worker decide whether it is safe.
*Correct Answer:* *C. Remove it from service and tag it as defective.*
*Explanation:*
Damaged ladders must not be used. They should be tagged "Do Not
Use" and removed from service until repaired or replaced.
---
Question 4*
Which of the following best describes an "unsafe condition"?
A. Wearing safety glasses.
, B. A frayed electrical cord lying in a walkway.
C. Attending a toolbox talk.
D. Following Lockout/Tagout procedures.
*Correct Answer:* *B. A frayed electrical cord lying in a walkway.*
*Explanation:*
An unsafe condition is a hazardous physical condition that could lead to
an accident or injury if not corrected.
---
Question 5*
What should you verify before using a fire extinguisher?
A. That you have been trained, the extinguisher is appropriate for the
fire, and you have a safe escape route.
B. That the fire is spreading quickly.
C. That the building is completely evacuated.
D. That someone is recording the event.
