Plumbing Book Year 2 Module 5 Exam |
Atcual Questions and Answers with Verified
Solutions | Latest Updated 2026
The purpose of the drain body is to funnel water into the piping system
Codes do not specify exact drain location
Floor and area drains should be lowest point in the floor
located at the
The bearing parts of backwater provide a mechanical seal against
valve backflow
are designed to
The drain bodies of floor drains weep holes
designed to be used with a
waterproof membrane are
designed
with
When laying out and cutting an change the location of the drain slightly
opening for a roof drain, if the
building frame interferes with the
drain's location you should
, installing a roof drain over rigid install a drain receiver before positioning
insulation the drain
body
When installing a deck plate, prior deck plate
to
inserting the drain into the roof
opening, ensure that the drain
body
is attached to the
Compression joints may be used cast iron
to
connect drain bodies to storm
water
piping that is made from
When installing waterproof make an opening in the membrane the
membranes in roof drains, the final size of the
step is to drain
A common problem encountered loss of correct elevation
with newly installed adjustable roof
drains is
When installing a waterproof apply mortar to the subfloor
shower
membrane, the first step is to
Atcual Questions and Answers with Verified
Solutions | Latest Updated 2026
The purpose of the drain body is to funnel water into the piping system
Codes do not specify exact drain location
Floor and area drains should be lowest point in the floor
located at the
The bearing parts of backwater provide a mechanical seal against
valve backflow
are designed to
The drain bodies of floor drains weep holes
designed to be used with a
waterproof membrane are
designed
with
When laying out and cutting an change the location of the drain slightly
opening for a roof drain, if the
building frame interferes with the
drain's location you should
, installing a roof drain over rigid install a drain receiver before positioning
insulation the drain
body
When installing a deck plate, prior deck plate
to
inserting the drain into the roof
opening, ensure that the drain
body
is attached to the
Compression joints may be used cast iron
to
connect drain bodies to storm
water
piping that is made from
When installing waterproof make an opening in the membrane the
membranes in roof drains, the final size of the
step is to drain
A common problem encountered loss of correct elevation
with newly installed adjustable roof
drains is
When installing a waterproof apply mortar to the subfloor
shower
membrane, the first step is to
