FDNY A-35 – Citywide Fire Guard for Torch Operations
Newest (2025 - 2026 Update) From Real Past Papers
Questions – A Set Of 100 Most Common Exam
Frequently Tested Questions And Answers In Details
100% Verified Exam Highly Recommendable Grade A+
(Verified Answers) Plus Rationales | Instant Download
Pdf
1. Which of the following best describes the primary responsibility of a Fire
Guard during torch operations?
A. Operate the torch equipment
B. Supervise building maintenance staff
C. Continuously monitor for fire hazards before, during, and after hot work
D. Repair damaged gas cylinders
Answer: C
The Fire Guard's primary duty is to maintain a continuous fire watch, identify fire
hazards, and take immediate action if a fire develops. This is the core
responsibility of the position.
2. Hot work includes:
A. Painting walls
B. Welding, cutting, brazing, soldering, and torch-applied roofing
C. Sweeping construction debris
D. Installing ceiling tiles
Answer: B
,Hot work includes operations that produce heat, sparks, or open flames capable
of igniting combustible materials.
3. Before torch work begins, combustible materials should be:
A. Left in place
B. Covered only with cardboard
C. Removed or properly protected
D. Sprayed with water only
Answer: C
Removing or shielding combustibles significantly reduces the risk of ignition
during hot work.
4. A Fire Guard should know the location of:
A. Employee lockers
B. Portable fire extinguishers and alarm devices
C. Office supplies
D. Break rooms
Answer: B
Immediate access to extinguishers and alarm systems allows a Fire Guard to
respond quickly to an emergency.
5. Which fire extinguisher is commonly required for hot work operations?
A. Water only
B. Foam only
C. Minimum 2-A:20-B:C rated extinguisher
D. Wet chemical only
Answer: C
,FDNY requires at least one portable extinguisher with a minimum 2-A:20-B:C
rating within the required travel distance.
6. Sparks from torch operations can travel:
A. Only a few inches
B. Several feet and ignite hidden combustibles
C. Only upward
D. Only outdoors
Answer: B
Hot sparks can travel significant distances and ignite combustible materials that
may not be immediately visible.
7. If a fire starts that cannot be safely extinguished, the Fire Guard should first:
A. Leave the building quietly
B. Notify coworkers only
C. Activate the alarm and notify the Fire Department
D. Continue observing
Answer: C
Prompt notification and alarm activation protect building occupants and ensure
rapid emergency response.
8. Oxygen cylinders must be:
A. Stored lying flat
B. Secured upright
C. Stored beside fuel gas cylinders without separation
D. Heated before use
Answer: B
, Compressed gas cylinders should be secured upright to prevent damage or
accidental release.
9. Fuel gas cylinders should be kept away from:
A. Water
B. Heat sources and ignition sources
C. Concrete floors
D. Portable ladders
Answer: B
Heat exposure increases cylinder pressure and creates a serious fire and explosion
hazard.
10.Which condition requires stopping hot work immediately?
A. Proper ventilation
B. Unsafe fire conditions
C. Clean work area
D. Available extinguisher
Answer: B
Unsafe conditions must be corrected before hot work resumes.
11.Torch operators and Fire Guards must communicate:
A. Only after work ends
B. Throughout the operation
C. Only during breaks
D. Once each shift
Answer: B
Continuous communication improves safety and allows rapid response to hazards.
Newest (2025 - 2026 Update) From Real Past Papers
Questions – A Set Of 100 Most Common Exam
Frequently Tested Questions And Answers In Details
100% Verified Exam Highly Recommendable Grade A+
(Verified Answers) Plus Rationales | Instant Download
1. Which of the following best describes the primary responsibility of a Fire
Guard during torch operations?
A. Operate the torch equipment
B. Supervise building maintenance staff
C. Continuously monitor for fire hazards before, during, and after hot work
D. Repair damaged gas cylinders
Answer: C
The Fire Guard's primary duty is to maintain a continuous fire watch, identify fire
hazards, and take immediate action if a fire develops. This is the core
responsibility of the position.
2. Hot work includes:
A. Painting walls
B. Welding, cutting, brazing, soldering, and torch-applied roofing
C. Sweeping construction debris
D. Installing ceiling tiles
Answer: B
,Hot work includes operations that produce heat, sparks, or open flames capable
of igniting combustible materials.
3. Before torch work begins, combustible materials should be:
A. Left in place
B. Covered only with cardboard
C. Removed or properly protected
D. Sprayed with water only
Answer: C
Removing or shielding combustibles significantly reduces the risk of ignition
during hot work.
4. A Fire Guard should know the location of:
A. Employee lockers
B. Portable fire extinguishers and alarm devices
C. Office supplies
D. Break rooms
Answer: B
Immediate access to extinguishers and alarm systems allows a Fire Guard to
respond quickly to an emergency.
5. Which fire extinguisher is commonly required for hot work operations?
A. Water only
B. Foam only
C. Minimum 2-A:20-B:C rated extinguisher
D. Wet chemical only
Answer: C
,FDNY requires at least one portable extinguisher with a minimum 2-A:20-B:C
rating within the required travel distance.
6. Sparks from torch operations can travel:
A. Only a few inches
B. Several feet and ignite hidden combustibles
C. Only upward
D. Only outdoors
Answer: B
Hot sparks can travel significant distances and ignite combustible materials that
may not be immediately visible.
7. If a fire starts that cannot be safely extinguished, the Fire Guard should first:
A. Leave the building quietly
B. Notify coworkers only
C. Activate the alarm and notify the Fire Department
D. Continue observing
Answer: C
Prompt notification and alarm activation protect building occupants and ensure
rapid emergency response.
8. Oxygen cylinders must be:
A. Stored lying flat
B. Secured upright
C. Stored beside fuel gas cylinders without separation
D. Heated before use
Answer: B
, Compressed gas cylinders should be secured upright to prevent damage or
accidental release.
9. Fuel gas cylinders should be kept away from:
A. Water
B. Heat sources and ignition sources
C. Concrete floors
D. Portable ladders
Answer: B
Heat exposure increases cylinder pressure and creates a serious fire and explosion
hazard.
10.Which condition requires stopping hot work immediately?
A. Proper ventilation
B. Unsafe fire conditions
C. Clean work area
D. Available extinguisher
Answer: B
Unsafe conditions must be corrected before hot work resumes.
11.Torch operators and Fire Guards must communicate:
A. Only after work ends
B. Throughout the operation
C. Only during breaks
D. Once each shift
Answer: B
Continuous communication improves safety and allows rapid response to hazards.
