MASS 2A-1C Hoisting UPDATED ACTUAL Questions and CORRECT
Answers
Question: How many pounds in a ton?
Correct Answer: 2000 pounds
Question: What type of equipment requires a H/H license in Mass?
Correct Answer: 10 feet or either, cu/yd 500 pounds
Question: What type of system is used when working on de-energized circuitry?
Correct Answer: Lock out/Tag out
Question: All welding and cutting on hoisting equipment must be done in accordance with what code?
Correct Answer: 1998 ASME Chapter IX
Question: What type of protection is required for hoisting operation?
Correct Answer: ROPS, Heat, Seatbelts, Shatterproof Glass, and Hardhats
Question: What regulatory authority governs hoisting in Mass?
Correct Answer: 520 CMR 6.00
Question: What does CMR stand for?
Correct Answer: Code of Massachusetts Regulation
Question: What chapter applies to Hoisting?
Correct Answer: Chapter 146 section 53-54A
Question: When loading a 10 wheeler; how do you approach the truck?
Correct Answer: Low and Slow, load front to back
Question: How do you carry the load?
Correct Answer: Close to the ground
Question: How close can you mechanically dig to a known utility?
Correct Answer: 18"
Question: When driving a loader down hill, what should you not do?
Correct Answer: Raise the bucket or put the machine in neutral
Question: When filling a trench should you use the backhoe bucket in a sweeping motion?
Correct Answer: No it can cause mechanical failure
Question: What are supper extensions used for?
Correct Answer: To dig deeper
Question: When rowing, not trailing a backhoe or ladder; what speed should you not exceed?
Correct Answer: 5 mph
Question: What does articulate mean on a wheel loader?
Answers
Question: How many pounds in a ton?
Correct Answer: 2000 pounds
Question: What type of equipment requires a H/H license in Mass?
Correct Answer: 10 feet or either, cu/yd 500 pounds
Question: What type of system is used when working on de-energized circuitry?
Correct Answer: Lock out/Tag out
Question: All welding and cutting on hoisting equipment must be done in accordance with what code?
Correct Answer: 1998 ASME Chapter IX
Question: What type of protection is required for hoisting operation?
Correct Answer: ROPS, Heat, Seatbelts, Shatterproof Glass, and Hardhats
Question: What regulatory authority governs hoisting in Mass?
Correct Answer: 520 CMR 6.00
Question: What does CMR stand for?
Correct Answer: Code of Massachusetts Regulation
Question: What chapter applies to Hoisting?
Correct Answer: Chapter 146 section 53-54A
Question: When loading a 10 wheeler; how do you approach the truck?
Correct Answer: Low and Slow, load front to back
Question: How do you carry the load?
Correct Answer: Close to the ground
Question: How close can you mechanically dig to a known utility?
Correct Answer: 18"
Question: When driving a loader down hill, what should you not do?
Correct Answer: Raise the bucket or put the machine in neutral
Question: When filling a trench should you use the backhoe bucket in a sweeping motion?
Correct Answer: No it can cause mechanical failure
Question: What are supper extensions used for?
Correct Answer: To dig deeper
Question: When rowing, not trailing a backhoe or ladder; what speed should you not exceed?
Correct Answer: 5 mph
Question: What does articulate mean on a wheel loader?
