CBSPD Tech Certification Exam Study Guide Questions and Answers
with Verified Solutions | Latest 2026 Update
Q: A positive biological indicator (BI) test shows that sterilization process
Answer:
Did not result in the
death of all the test organisms
Q: Lot control numbers should be placed on each package sterilized, and on the
Answer:
Sterilization log
Q: Basin sets must be titled forward, on their side, on the steam sterilizer rack to
Answer:
Permit
condensate to run off
,CBSPD Tech Certification Exam Study Guide Questions and Answers
with Verified Solutions | Latest 2026 Update
Q: Which of the following is necessary to attain the high temperature needed in a
steam sterilizer?
Answer:
Pressure
Q: The purpose of the dynamic air removal cycle of pre-vacuum steam sterilizer is
to
Answer:
Remove
air from the chamber
Q: Heat sensing thermometers for steam sterilizers are located in the
Answer:
Drain line
, CBSPD Tech Certification Exam Study Guide Questions and Answers
with Verified Solutions | Latest 2026 Update
Q: To kill the remaining microoragnisms on surgical instruments, the MOST
cost-effective
Answer:
sterilization method is generally considered to be Steam under pressure
Q: When heat is added to steam without increasing the moisture content, the steam
is called
Answer:
Superheated steam
Q: Which of the following sterilization methods would be appropriate for
petrolatum guaze
Answer:
Dry
heat
with Verified Solutions | Latest 2026 Update
Q: A positive biological indicator (BI) test shows that sterilization process
Answer:
Did not result in the
death of all the test organisms
Q: Lot control numbers should be placed on each package sterilized, and on the
Answer:
Sterilization log
Q: Basin sets must be titled forward, on their side, on the steam sterilizer rack to
Answer:
Permit
condensate to run off
,CBSPD Tech Certification Exam Study Guide Questions and Answers
with Verified Solutions | Latest 2026 Update
Q: Which of the following is necessary to attain the high temperature needed in a
steam sterilizer?
Answer:
Pressure
Q: The purpose of the dynamic air removal cycle of pre-vacuum steam sterilizer is
to
Answer:
Remove
air from the chamber
Q: Heat sensing thermometers for steam sterilizers are located in the
Answer:
Drain line
, CBSPD Tech Certification Exam Study Guide Questions and Answers
with Verified Solutions | Latest 2026 Update
Q: To kill the remaining microoragnisms on surgical instruments, the MOST
cost-effective
Answer:
sterilization method is generally considered to be Steam under pressure
Q: When heat is added to steam without increasing the moisture content, the steam
is called
Answer:
Superheated steam
Q: Which of the following sterilization methods would be appropriate for
petrolatum guaze
Answer:
Dry
heat
