MK2 SWE Exam Questions and Answers with
Verified Solutions | Latest Updated 2026
cylinder liners in diesel engines close grain cast iron
are
commonly constructed from?
the function of the piston is to? transfer the thermal energy from
expanding gases
to the connecting rod as mechanical
energy
some cylinders are plated with porous chromium
what
to increase lubrication and also aid
in wearing?
the function of the valve guide pilot provide a rigid axis for the grinding stone
is to? sleeve
how do you dress slight scoring on oil stone
crankshaft bearing surface?
generally the crown of the piston is allow for expansion and proper fit
slightly smaller in diameter than
the
skirt for what reason?
, when new rings are installed, you feeler (thickness) gauge
should measure the ring gap with
a?
gaps on adjacent rings on pistons 180° apart to reduce gas leakage
should be staggered how far
apart?
the function of the oil control ring distribute oil to the cylinder wall and
is? remove
excess oil
on a 4 stroke engine, which valve exhaust
is
the bigger of the two, intake or
exhaust?
what type of valve is used in poppet valve
internal
combustion engines for intake and
exhaust?
in a 2 stroke engine, the load is the lower half of the piston pin bearings
always placed on what? and the
upper half of the connecting rod bearings
what is the cycle of a 4 stroke intake, combustion, power, exhaust
engine?
what is the cycle of a 2 stroke intake-compression; power-scavenging
engine?
Verified Solutions | Latest Updated 2026
cylinder liners in diesel engines close grain cast iron
are
commonly constructed from?
the function of the piston is to? transfer the thermal energy from
expanding gases
to the connecting rod as mechanical
energy
some cylinders are plated with porous chromium
what
to increase lubrication and also aid
in wearing?
the function of the valve guide pilot provide a rigid axis for the grinding stone
is to? sleeve
how do you dress slight scoring on oil stone
crankshaft bearing surface?
generally the crown of the piston is allow for expansion and proper fit
slightly smaller in diameter than
the
skirt for what reason?
, when new rings are installed, you feeler (thickness) gauge
should measure the ring gap with
a?
gaps on adjacent rings on pistons 180° apart to reduce gas leakage
should be staggered how far
apart?
the function of the oil control ring distribute oil to the cylinder wall and
is? remove
excess oil
on a 4 stroke engine, which valve exhaust
is
the bigger of the two, intake or
exhaust?
what type of valve is used in poppet valve
internal
combustion engines for intake and
exhaust?
in a 2 stroke engine, the load is the lower half of the piston pin bearings
always placed on what? and the
upper half of the connecting rod bearings
what is the cycle of a 4 stroke intake, combustion, power, exhaust
engine?
what is the cycle of a 2 stroke intake-compression; power-scavenging
engine?
