Millwright Rigging & Lifting Exam Questions
and Answers with Verified Solutions | Latest
Updated 2026
The breaking strength of rope is
a. force needed to pull rope
1 b. force needed to tear rope
c. force needed to break the rope
d. force needed to stretch rope
Never incline the legs of a double basket hitch more than?
a. 50*
2 B. 20*
C. 70*
d. 60*
What must you know about a rope to prevent overloading?
a. breaking strength
4 b. safe work load SWL
c. safety factor
d. all the above
The breaking strength of rope is c. force needed to break the rope
a. force needed to pull rope
b. force needed to tear rope
c. force needed to break the rope
d. force needed to stretch rope
,What are spreader beams used d. support long loads during lifts
for?
a. calculate loads
b. use on heavy lods
c. support loads during lifts
d. support long loads during lifts
What are equalizer beams used a. equalize the load on sling legs and to
for? keep
a. equalize the load on sling legs equal loads on dual hoists lines when
and to keep equal loads on dual making
hoists lines when making tandem tandem lifts
lifts the load capacity of beams depends on the
b. equalize the load on sling legs load
and to keep equal loads on dual between those two points. If distance
hoists lines when lifting shanks across beam
c. equalize the load on sling legs is doubled. Load capacity is halves
and to keep equal loads on dual
hoists lines when making angular
lifts
d. equalize the load on sling legs
and to keep equal loads on dual
hoists lines when making
deformed
lifts
When using an eye bolt, keep the to the plane of the eye
bending to aminimum. Always
apply
the loads ______________
especially when
using bridal slings.
, These are made from a single single basket hitch
length
of sling material passed through a
load. Both ends of the sling attach
to
the main hook.
a. bridal hitch
b. single vertical hitch
c. single basket hitch
d. double basket hitch
If you are lifting people you must 1/10
not
lift more than what ratio of
breaking
strength?
A knot can reduce the breaking a. 50%
strentgh of the rope by cable clips 20%
a. 50% sharp corners should have padding
B. 20%
C. 70%
d. 60%
Tackle blocks are similar to wire c. lighter capacity
rope
blocks but are lightrer and have?
a. larger shanks
b. more sheaves
c. lighter capacity
d. higher capacity
and Answers with Verified Solutions | Latest
Updated 2026
The breaking strength of rope is
a. force needed to pull rope
1 b. force needed to tear rope
c. force needed to break the rope
d. force needed to stretch rope
Never incline the legs of a double basket hitch more than?
a. 50*
2 B. 20*
C. 70*
d. 60*
What must you know about a rope to prevent overloading?
a. breaking strength
4 b. safe work load SWL
c. safety factor
d. all the above
The breaking strength of rope is c. force needed to break the rope
a. force needed to pull rope
b. force needed to tear rope
c. force needed to break the rope
d. force needed to stretch rope
,What are spreader beams used d. support long loads during lifts
for?
a. calculate loads
b. use on heavy lods
c. support loads during lifts
d. support long loads during lifts
What are equalizer beams used a. equalize the load on sling legs and to
for? keep
a. equalize the load on sling legs equal loads on dual hoists lines when
and to keep equal loads on dual making
hoists lines when making tandem tandem lifts
lifts the load capacity of beams depends on the
b. equalize the load on sling legs load
and to keep equal loads on dual between those two points. If distance
hoists lines when lifting shanks across beam
c. equalize the load on sling legs is doubled. Load capacity is halves
and to keep equal loads on dual
hoists lines when making angular
lifts
d. equalize the load on sling legs
and to keep equal loads on dual
hoists lines when making
deformed
lifts
When using an eye bolt, keep the to the plane of the eye
bending to aminimum. Always
apply
the loads ______________
especially when
using bridal slings.
, These are made from a single single basket hitch
length
of sling material passed through a
load. Both ends of the sling attach
to
the main hook.
a. bridal hitch
b. single vertical hitch
c. single basket hitch
d. double basket hitch
If you are lifting people you must 1/10
not
lift more than what ratio of
breaking
strength?
A knot can reduce the breaking a. 50%
strentgh of the rope by cable clips 20%
a. 50% sharp corners should have padding
B. 20%
C. 70%
d. 60%
Tackle blocks are similar to wire c. lighter capacity
rope
blocks but are lightrer and have?
a. larger shanks
b. more sheaves
c. lighter capacity
d. higher capacity
