The purpose of a contractor safety action plan is? -
xz xz xz xz xz xz xz xz xz
anslocation specific plan for carrying out elements of a company's safety management sys
xz xz xz xz xz xz xz xz xz xz xz xz xz
tem
A contractor employer must ensure that its safety action plan(s) are: - ansAll:
xz xz xz xz xz xz xz xz xz xz xz xz xz
maintained with each work group on BNSF railway property xz xz xz xz xz xz xz xz
Available withe the BNSF project Representative or Employee in charge
xz xz xz xz xz xz xz xz xz
Uploaded to Contractor Orientation at www.bnsfcontractor.com xz xz xz xz xz
The 24 hour BNSF emergency number to call if an incident or injury occurs is 1-800-832-
xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz
5452 and is located in the first page of the contractor safety action plan and your contractor
xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz
orientation badge - ansTrue xz xz xz
1. C xz
2. D xz
3. A - ans
xz xz xz
Which of the following is NOT a step in a job Safety Briefing? -
xz xz xz xz xz xz xz xz xz xz xz xz xz
ansVerify job location for the following week
xz xz xz xz xz xz xz
should be: xz
Discussing the task at hand xz xz xz xz xz
Delegate and discuss life saving processes xz xz xz xz xz
Establish cues to pause the work xz xz xz xz xz
Which of the following is Not a form of personal protection? - anssunglasses
xz xz xz xz xz xz xz xz xz xz xz xz
These are: xz
Hard Hat, Safety toed work boots
xz xz xz xz xz
reflective vest xz
Good housekeeping and material storage can prevent injuries and includes the following a
xz xz xz xz xz xz xz xz xz xz xz xz
ctivies. - ansAll: xz xz
Keeping walk ways clear of hazards xz xz xz xz xz
Posting approperiate warning signs to identify hazards
xz xz xz xz xz xz
Properly storing flammable and combstible liquids and gases
xz xz xz xz xz xz xz
Latter - ansAscending/Descending -
xz xz xz
An exposure that exists when a person or an object may be unexpectedly struck.
xz xz xz xz xz xz xz xz xz xz xz xz xz xz
Door
1. C xz
2. B xz
3. D xz
, 4. LATTER/ DOOR. TRAIN/ BEAM - ansPinch Point -
xz xz xz xz xz xz xz xz
An exposure that exists when a person or an object may be unexpectedly struck
xz xz xz xz xz xz xz xz xz xz xz xz xz xz
Train - ansLine of fire/ Release of Energy -
xz xz xz xz xz xz xz xz
An exposure that exists when a person or an object may be unexpectedly struck
xz xz xz xz xz xz xz xz xz xz xz xz xz xz
Beam - ansWalking/ Path of Travel - xz xz xz xz xz xz
An exposure that exists along a path of travel that could cause a slip, Trip, or Fall
xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz
When an incident or injury occurs on BNSF property, it must be reported to the BNSF railwa
xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz
y project representative - ansTrue
xz xz xz xz
I can be removed from the job site if I am found in possession of drugs, alcohol, or weapons
xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz
on BNSF railway property. - ansTrue
xz xz xz xz xz
How often should portable fire extinguishers be visually inspected - ansMonthly
xz xz xz xz xz xz xz xz xz xz
Hand and portable tools that have been labled "out of service" are acceptable to for a single
xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz
or quick job, but not for an extended amount of time. - ansFalse
xz xz xz xz xz xz xz xz xz xz xz xz
Copy of MSDS/ xz xz
SDS (s) must be maintained with your work group while on a BNSF project. - ansTrue
xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz
1. A xz
2. A xz xz
3. B xz
4. B xz
5. A - ans xz xz xz
Slings or rigging should only be inspected weekly. - ansFalse
xz xz xz xz xz xz xz xz xz
During the hazardous Energy control / xz xz xz xz xz
Lockout Tagout process, you must be sure energy sources of all types are controlled. -
xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz
ansTrue
xz
Personal fall arrest systems must be inspected before each use - ansTrue xz xz xz xz xz xz xz xz xz xz xz
Which of the following may cause an arc flash event. - ansAll:
xz xz xz xz xz xz xz xz xz xz xz xz
A Loose termination
xz xz
Dropping a tool xz xz
accidental tourching xz
Which of the following are used in defining a space as confined space? - ansAll:
xz xz xz xz xz xz xz xz xz xz xz xz xz xz
It is large enough and so configured that an employee can bodily enter and perform assigne
xz xz xz xz xz xz xz xz xz xz xz xz xz xz xz
d work. xz
It has limited or restricked means of entry
xz xz xz xz xz xz xz
It is not designed or intended for continuous occupancy by personnel.
xz xz xz xz xz xz xz xz xz xz