6/24/26, 8:41 AM Level 1 - Electronic Security Technician EXAM Already Verified Test | Questions & Answers, Well Elaborated | 100% Verified solutio…
Level 1 - Electronic Security Technician EXAM
Already Verified Test | Questions & Answers, Well
Elaborated | 100% Verified solutions |2026 Latest!!
Save Add to calendar
Terms in this set (116)
When a standard is adopted by an Code
agency having authority, the
standard becomes a _____ and may
contain requirements for alarm
installations.
Prior to working in a particular All of the above: Statutes, Ordinances, and Board
jurisdiction, alarm technicians should Rules
consult _____
An organization, office, or individual Authority Having Jurisdiction (AHJ)
responsible for enforcing the
requirements of a code or standard,
or for approving equipment,
materials, an installation, or a
procedure, is known as the _____.
An organization's or association's a Standard
published guideline containing
recommended installation practices
is known as _____.
https://quizlet.com/1191495759/level-1-electronic-security-technician-exam-already-verified-test-questions-answers-well-elaborated-100-verified-solut… 1/18
,6/24/26, 8:41 AM Level 1 - Electronic Security Technician EXAM Already Verified Test | Questions & Answers, Well Elaborated | 100% Verified solutio…
True or False? The term "shall" when True
found in code is something that must
be done, while the term "should" is a
recommendation.
Electrons have what type of charge? Negative
Where are valence electrons in the outer shell
located?
True or False? Stable atoms have the True
outer electron shells completely
filled.
What is the unit of measurement for Ohms (Ω)
resistance?
What is the relationship between Conductance = 1 / resistance
resistance and conductance?
In a _____ circuit, electrons have one Parallel
or more paths.
_____ is the same at all points in a Current
series circuit.
In a series circuit, _____ is additive. Resistance
In the circuit shown above, the volt 4 volts
meter would measure ________ volts.
(12V with R1 = 20 ohms, R2 = 20 ohms,
and R4 = 20 ohms)
https://quizlet.com/1191495759/level-1-electronic-security-technician-exam-already-verified-test-questions-answers-well-elaborated-100-verified-solut… 2/18
, 6/24/26, 8:41 AM Level 1 - Electronic Security Technician EXAM Already Verified Test | Questions & Answers, Well Elaborated | 100% Verified solutio…
True or False? In a series circuit, the True
total of all voltage drops is always
equal to the supplied voltage.
To convert kilo-ohms to ohms, the multiplied by
provided value must be _____ _____
1,000.
Convert 500 milliamps to amps. 0.5 amps
(500 divided by 1000)
The symbol used to represent _____ is Resistance (ohms)
the Greek letter omega.
In the Ohm's Law formula the I used Intensity
to represent current stands for _____.
What is the total resistance of the 120 ohms of resistance
above circuit?
(Resistance is measured in ohms.
Resistance is additive, so add all
ohms together)
(R1 = 20 ohms, R2 = 40 ohms, R4 = 60
ohms)
20 + 40 + 60 = ____
A transformer is used to _____ voltage increase or decrease
in a circuit
A loose electrical connection will the temperature
raise resistance in a circuit. What
other factor will raise as a result?
https://quizlet.com/1191495759/level-1-electronic-security-technician-exam-already-verified-test-questions-answers-well-elaborated-100-verified-solut… 3/18
Level 1 - Electronic Security Technician EXAM
Already Verified Test | Questions & Answers, Well
Elaborated | 100% Verified solutions |2026 Latest!!
Save Add to calendar
Terms in this set (116)
When a standard is adopted by an Code
agency having authority, the
standard becomes a _____ and may
contain requirements for alarm
installations.
Prior to working in a particular All of the above: Statutes, Ordinances, and Board
jurisdiction, alarm technicians should Rules
consult _____
An organization, office, or individual Authority Having Jurisdiction (AHJ)
responsible for enforcing the
requirements of a code or standard,
or for approving equipment,
materials, an installation, or a
procedure, is known as the _____.
An organization's or association's a Standard
published guideline containing
recommended installation practices
is known as _____.
https://quizlet.com/1191495759/level-1-electronic-security-technician-exam-already-verified-test-questions-answers-well-elaborated-100-verified-solut… 1/18
,6/24/26, 8:41 AM Level 1 - Electronic Security Technician EXAM Already Verified Test | Questions & Answers, Well Elaborated | 100% Verified solutio…
True or False? The term "shall" when True
found in code is something that must
be done, while the term "should" is a
recommendation.
Electrons have what type of charge? Negative
Where are valence electrons in the outer shell
located?
True or False? Stable atoms have the True
outer electron shells completely
filled.
What is the unit of measurement for Ohms (Ω)
resistance?
What is the relationship between Conductance = 1 / resistance
resistance and conductance?
In a _____ circuit, electrons have one Parallel
or more paths.
_____ is the same at all points in a Current
series circuit.
In a series circuit, _____ is additive. Resistance
In the circuit shown above, the volt 4 volts
meter would measure ________ volts.
(12V with R1 = 20 ohms, R2 = 20 ohms,
and R4 = 20 ohms)
https://quizlet.com/1191495759/level-1-electronic-security-technician-exam-already-verified-test-questions-answers-well-elaborated-100-verified-solut… 2/18
, 6/24/26, 8:41 AM Level 1 - Electronic Security Technician EXAM Already Verified Test | Questions & Answers, Well Elaborated | 100% Verified solutio…
True or False? In a series circuit, the True
total of all voltage drops is always
equal to the supplied voltage.
To convert kilo-ohms to ohms, the multiplied by
provided value must be _____ _____
1,000.
Convert 500 milliamps to amps. 0.5 amps
(500 divided by 1000)
The symbol used to represent _____ is Resistance (ohms)
the Greek letter omega.
In the Ohm's Law formula the I used Intensity
to represent current stands for _____.
What is the total resistance of the 120 ohms of resistance
above circuit?
(Resistance is measured in ohms.
Resistance is additive, so add all
ohms together)
(R1 = 20 ohms, R2 = 40 ohms, R4 = 60
ohms)
20 + 40 + 60 = ____
A transformer is used to _____ voltage increase or decrease
in a circuit
A loose electrical connection will the temperature
raise resistance in a circuit. What
other factor will raise as a result?
https://quizlet.com/1191495759/level-1-electronic-security-technician-exam-already-verified-test-questions-answers-well-elaborated-100-verified-solut… 3/18
