Massachusetts Asbestos Project
Designer License Practice Exam
Questions With Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1.
Which regulation primarily governs asbestos abatement
activities in Massachusetts?
A. OSHA 1926 Subpart M
B. EPA TSCA Title II (AHERA)
C. MassDEP Asbestos Regulations (310 CMR 7.15)
D. NFPA 101
Correct Answer: C
Rationale: MassDEP regulates asbestos work in Massachusetts
under 310 CMR 7.15, which governs notification, handling,
disposal, and licensing requirements for asbestos-related
activities.
,2.
The primary role of an asbestos project designer is to:
A. Perform demolition
B. Conduct asbestos removal
C. Design abatement plans and specifications
D. Transport asbestos waste
Correct Answer: C
Rationale: The project designer develops technical plans,
specifications, and methods for asbestos abatement but does
not perform physical removal or waste handling.
3.
Which material is considered friable asbestos?
A. Vinyl floor tile
B. Cement pipe
C. Spray-applied fireproofing
D. Mastics in solid form
Correct Answer: C
Rationale: Friable asbestos can be crumbled by hand pressure
when dry, such as spray-applied fireproofing, making it highly
hazardous due to fiber release potential.
,4.
A key purpose of negative air pressure in containment is to:
A. Increase temperature inside containment
B. Prevent fiber escape to surrounding areas
C. Dry asbestos materials
D. Improve lighting conditions
Correct Answer: B
Rationale: Negative pressure ensures air flows into the
containment but not out, preventing asbestos fibers from
escaping into clean areas.
5.
Which document defines the scope of asbestos abatement
work?
A. Building permit
B. Abatement specification
C. OSHA log
D. Fire safety plan
Correct Answer: B
Rationale: The abatement specification outlines procedures,
containment methods, removal techniques, and safety
requirements for the project.
, 6.
Which agency enforces worker safety standards during asbestos
removal?
A. MassDEP
B. EPA
C. OSHA
D. CDC
Correct Answer: C
Rationale: OSHA regulates worker health and safety, including
asbestos exposure limits and PPE requirements under 29 CFR
1926.1101.
7.
The acceptable airborne asbestos exposure limit (PEL) set by
OSHA is:
A. 1.0 f/cc
B. 0.1 f/cc
C. 0.01 f/cc
D. 5.0 f/cc
Correct Answer: B
Designer License Practice Exam
Questions With Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1.
Which regulation primarily governs asbestos abatement
activities in Massachusetts?
A. OSHA 1926 Subpart M
B. EPA TSCA Title II (AHERA)
C. MassDEP Asbestos Regulations (310 CMR 7.15)
D. NFPA 101
Correct Answer: C
Rationale: MassDEP regulates asbestos work in Massachusetts
under 310 CMR 7.15, which governs notification, handling,
disposal, and licensing requirements for asbestos-related
activities.
,2.
The primary role of an asbestos project designer is to:
A. Perform demolition
B. Conduct asbestos removal
C. Design abatement plans and specifications
D. Transport asbestos waste
Correct Answer: C
Rationale: The project designer develops technical plans,
specifications, and methods for asbestos abatement but does
not perform physical removal or waste handling.
3.
Which material is considered friable asbestos?
A. Vinyl floor tile
B. Cement pipe
C. Spray-applied fireproofing
D. Mastics in solid form
Correct Answer: C
Rationale: Friable asbestos can be crumbled by hand pressure
when dry, such as spray-applied fireproofing, making it highly
hazardous due to fiber release potential.
,4.
A key purpose of negative air pressure in containment is to:
A. Increase temperature inside containment
B. Prevent fiber escape to surrounding areas
C. Dry asbestos materials
D. Improve lighting conditions
Correct Answer: B
Rationale: Negative pressure ensures air flows into the
containment but not out, preventing asbestos fibers from
escaping into clean areas.
5.
Which document defines the scope of asbestos abatement
work?
A. Building permit
B. Abatement specification
C. OSHA log
D. Fire safety plan
Correct Answer: B
Rationale: The abatement specification outlines procedures,
containment methods, removal techniques, and safety
requirements for the project.
, 6.
Which agency enforces worker safety standards during asbestos
removal?
A. MassDEP
B. EPA
C. OSHA
D. CDC
Correct Answer: C
Rationale: OSHA regulates worker health and safety, including
asbestos exposure limits and PPE requirements under 29 CFR
1926.1101.
7.
The acceptable airborne asbestos exposure limit (PEL) set by
OSHA is:
A. 1.0 f/cc
B. 0.1 f/cc
C. 0.01 f/cc
D. 5.0 f/cc
Correct Answer: B
