ICC Reinforced Concrete Exam Questions
With Correct Answers
ACI 318 - CORRECT ANSWER✔✔-Governs structural concrete design,
| | | | | | | |
construction, inspection and acceptance | | |
Load Path - CORRECT ANSWER✔✔-A continuous system of structural
| | | | | | | | |
elements that transfer an applied load to the supporting soil.
| | | | | | | | |
Which of the following publications are most useful for a Special
| | | | | | | | | | |
Inspector? - CORRECT ANSWER✔✔-ACI 318 | | | |
A_____ is a horizontal member that transfers loads laterally. - CORRECT
| | | | | | | | | | |
ANSWER✔✔-Beam
Plain concrete refers to: - CORRECT ANSWER✔✔-Concrete with less
| | | | | | | | |
than minimum amount of reinforcement
| | | |
A beam is primarily subject to ____ whole a column is primarily subject
| | | | | | | | | | | | |
to _______. - CORRECT ANSWER✔✔-A. Shear, Flexure B. Compression,
| | | | | | | | |
flexure C. Flexure, compression D. Compression, shear
| | | | | |
, Answer C. Flexure, Compression
| | |
A beam is primarily subject to compression while a column is primarily
| | | | | | | | | | | |
subject to shear. True or False - CORRECT ANSWER✔✔-False.
| | | | | | | |
Beam is subject to Flexure, column is subject to compression.
| | | | | | | | |
The best place to look up definitions in ACI 318-14 is: - CORRECT
| | | | | | | | | | | | |
ANSWER✔✔-Chapter 2 |
Foundations cast at the same elevation as the soil grade are known as: -
| | | | | | | | | | | | | |
CORRECT ANSWER✔✔-Shallow |
What causes concrete to set and become hardened? - CORRECT
| | | | | | | | | |
ANSWER✔✔-Hydration
Cement forming chemical bonds with water molecules, which sets
| | | | | | | | |
things in motion to become an extremely hardened material. - CORRECT
| | | | | | | | | |
ANSWER✔✔-Hydration Process
| |
With Correct Answers
ACI 318 - CORRECT ANSWER✔✔-Governs structural concrete design,
| | | | | | | |
construction, inspection and acceptance | | |
Load Path - CORRECT ANSWER✔✔-A continuous system of structural
| | | | | | | | |
elements that transfer an applied load to the supporting soil.
| | | | | | | | |
Which of the following publications are most useful for a Special
| | | | | | | | | | |
Inspector? - CORRECT ANSWER✔✔-ACI 318 | | | |
A_____ is a horizontal member that transfers loads laterally. - CORRECT
| | | | | | | | | | |
ANSWER✔✔-Beam
Plain concrete refers to: - CORRECT ANSWER✔✔-Concrete with less
| | | | | | | | |
than minimum amount of reinforcement
| | | |
A beam is primarily subject to ____ whole a column is primarily subject
| | | | | | | | | | | | |
to _______. - CORRECT ANSWER✔✔-A. Shear, Flexure B. Compression,
| | | | | | | | |
flexure C. Flexure, compression D. Compression, shear
| | | | | |
, Answer C. Flexure, Compression
| | |
A beam is primarily subject to compression while a column is primarily
| | | | | | | | | | | |
subject to shear. True or False - CORRECT ANSWER✔✔-False.
| | | | | | | |
Beam is subject to Flexure, column is subject to compression.
| | | | | | | | |
The best place to look up definitions in ACI 318-14 is: - CORRECT
| | | | | | | | | | | | |
ANSWER✔✔-Chapter 2 |
Foundations cast at the same elevation as the soil grade are known as: -
| | | | | | | | | | | | | |
CORRECT ANSWER✔✔-Shallow |
What causes concrete to set and become hardened? - CORRECT
| | | | | | | | | |
ANSWER✔✔-Hydration
Cement forming chemical bonds with water molecules, which sets
| | | | | | | | |
things in motion to become an extremely hardened material. - CORRECT
| | | | | | | | | |
ANSWER✔✔-Hydration Process
| |