BICSI Installer Certification Exam Study Set 2025–
2027 ||Verified Exam!!!|| Installer 1 & Installer 2 Review
+ Final Exam | Information Transport Systems (ITS) |
Verified Questions with Standards-Based
Explanations
What is the specified performance level for category 6
cable? - Answer-250MHz
Which type of optical fiber cable should be color coded
with an Orange outer cable sheath? - Answer-MM with a
100 um core diameter
Which of the following is the primary benefit of using wall-
mounted racks and cabinets in place of traditional
equipment racks? - Answer-Takes up less space within the
equipment room
Which topology uses a linear configuration that places all
network devices on one length of cable? - Answer-Bus
,2|Page
Which of the TWO organizations jointly oversee the
worldwide standardization of telecommunications cabling?
- Answer-ISO & IEC
Which of the following is a building-serving space that
houses large pieces of common active equipment? -
Answer-ER
Which phase of testing includes documenting the test
results? - Answer-Phase 3
Which of the following is designed to provide protection
from harmful chemicals? - Answer-Rubber Gloves
A third 90 degree bend may be permitted in a conduit run
if the run does NOT exceed ______ ? - Answer-10m
which of the following is a property of an electromagnetic
field built around a conductor that opposes any changes in
current flow in a circuit? - Answer-Inductance
Which of the following markings is used for non-
conductive optical fiber general purpose cables? - Answer-
OFNG
,3|Page
Which of the following refers to a set of rules issued by a
governmental body at the state level within the US? -
Answer-Regulations
Which of the following are typically used to support cables
between a cable tray and work area outlets? - Answer-J-
Hook
Which of the following PPE items MUST be worn at all
times when you are working with or handling OF? -
Answer-Eye protection
Which of the following is used to equalize potential
differences between the SBB on the same floor? - Answer-
BBC
Which type of optical fiber cable should be color coded
with a RED outer cable sheath? - Answer-Dispersion-
shifted SM optical fiber
Which of the following connector styles is presently used
within optical fiber cabling systems (i.e., it is NOT a legacy
connector)? - Answer-Small form factor (SFF)
, 4|Page
Which of the following components is used to bond the
electrical system's grounding electrode system to the
PBB? - Answer-TBC
What is the characteristic impedance of Series-6 coaxial
cable? - Answer-75 ohms
Which of the following makes the biggest impression on a
customer when you are communicating via email? -
Answer-Choice of words
Which of the following attachment methods does BICSI
recommend for attaching coaxial connectors to coaxial
cable? - Answer-Compression
Electrical power (P) is measured in ___________? -
Answer-Watts
During a retrofit, an installation crew discovers old
insulation that they think may contain asbestos, they
cannot complete their work without disturbing the