CM 2215 UPDATED EXAMS SCRIPT ACTUAL
QUESTIONS AND ANSWERS SURE A+
✔✔The preferred method to control exposure is - ✔✔Engineering Controls
✔✔The second best way to control exposure is - ✔✔Administrative Controls
✔✔The least preferred way to control exposure is - ✔✔PPE
✔✔Safe = Acceptable Level of Risk
Risk = - ✔✔Probability ✕ Severity
of injury
✔✔Fall Protection subpart? - ✔✔M
✔✔Employers must provide fall protection when - ✔✔"unprotected sides and edges" 6
feet (1.8 m) or more above a lower level
✔✔OSHA considers the three types of conventional fall protection to be: -
✔✔Guardrails, Personal Fall Arrest Systems (PFAS), and Safety Nets
, ✔✔A Guardrail consists of a:
a. *Tops rail that must be _____ inches high ± 3 inches and hold _____ lbs*
b. Mid rail that must be halfway and hold _____ lbs
c. Toe board rail that must be 4 inches high and hold _____ lbs - ✔✔a. 42 inches, 200
lbs
b. 150 lbs
c. 50 lbs
✔✔A PFAS consists of a:
a. _____ point that can hold _____ lbs per worker
b. _____
c. _____ - ✔✔Anchorage, 5,000 lbs per worker
Body Harness
Lanyard/Connector
✔✔*When stopping a fall, a personal fall arrest system shall bring an employee to a
complete stop and limit the maximum deceleration distance to _____ feet* - ✔✔3.5 feet
✔✔Personal fall arrest systems, when stopping a fall, shall be rigged such that an
employee cannot free fall more than _____ feet or contact any lower level - ✔✔6 feet
✔✔Safety nets must be as _____ to the workers as possible and be _____ tested -
✔✔close as practicable under the surface, drop
✔✔*When mechanical equipment is being used perpendicular to the roof edge, the
warning lines cannot be closer than _____ feet* - ✔✔10 feet
✔✔OSHA requires that scaffolding being erected, moved, dismantled or altered be
supervised by a _____ person - ✔✔competent
✔✔On temporary stairs, handrails (to provide adequate handholds for employees
grasping to prevent falling) shall have a minimum clearance of _____ inches between
the handrail and walls - ✔✔3 inches
✔✔*A controlled decking zone can only be used as fall protection up to a maximum
height of _____ feet* - ✔✔30 feet
✔✔Excavations subpart? - ✔✔P
✔✔OSHA defines an excavation as any man-made cut, cavity, trench, or depression in
the earth's surface formed by _____ removal - ✔✔earth
QUESTIONS AND ANSWERS SURE A+
✔✔The preferred method to control exposure is - ✔✔Engineering Controls
✔✔The second best way to control exposure is - ✔✔Administrative Controls
✔✔The least preferred way to control exposure is - ✔✔PPE
✔✔Safe = Acceptable Level of Risk
Risk = - ✔✔Probability ✕ Severity
of injury
✔✔Fall Protection subpart? - ✔✔M
✔✔Employers must provide fall protection when - ✔✔"unprotected sides and edges" 6
feet (1.8 m) or more above a lower level
✔✔OSHA considers the three types of conventional fall protection to be: -
✔✔Guardrails, Personal Fall Arrest Systems (PFAS), and Safety Nets
, ✔✔A Guardrail consists of a:
a. *Tops rail that must be _____ inches high ± 3 inches and hold _____ lbs*
b. Mid rail that must be halfway and hold _____ lbs
c. Toe board rail that must be 4 inches high and hold _____ lbs - ✔✔a. 42 inches, 200
lbs
b. 150 lbs
c. 50 lbs
✔✔A PFAS consists of a:
a. _____ point that can hold _____ lbs per worker
b. _____
c. _____ - ✔✔Anchorage, 5,000 lbs per worker
Body Harness
Lanyard/Connector
✔✔*When stopping a fall, a personal fall arrest system shall bring an employee to a
complete stop and limit the maximum deceleration distance to _____ feet* - ✔✔3.5 feet
✔✔Personal fall arrest systems, when stopping a fall, shall be rigged such that an
employee cannot free fall more than _____ feet or contact any lower level - ✔✔6 feet
✔✔Safety nets must be as _____ to the workers as possible and be _____ tested -
✔✔close as practicable under the surface, drop
✔✔*When mechanical equipment is being used perpendicular to the roof edge, the
warning lines cannot be closer than _____ feet* - ✔✔10 feet
✔✔OSHA requires that scaffolding being erected, moved, dismantled or altered be
supervised by a _____ person - ✔✔competent
✔✔On temporary stairs, handrails (to provide adequate handholds for employees
grasping to prevent falling) shall have a minimum clearance of _____ inches between
the handrail and walls - ✔✔3 inches
✔✔*A controlled decking zone can only be used as fall protection up to a maximum
height of _____ feet* - ✔✔30 feet
✔✔Excavations subpart? - ✔✔P
✔✔OSHA defines an excavation as any man-made cut, cavity, trench, or depression in
the earth's surface formed by _____ removal - ✔✔earth
